http://www.flexible-borescope.com/ VOscope - Visual Optics - Video Fiberoptic Scope - Flexible Borescope - VS72-10WW - VS36-10WW http://www.flexible-borescope.com/product/leica+geosystems+-+disto+a5.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+a5.html   The most versatile   Optimum functionality - with ergonomic design   The Leica DISTO™ A5 stands out thanks to both its ergonomic design and the soft rubber grip that allows it to sit well in the hand. With its unique end piece, wide range of additional functions and integrated view finder, the Leica DISTO™ A5 is fully equipped to tackle any measuring task. The most common calculating functions are of course quickly and easily accessed via the corresponding shortcut keys. Indoors or outdoors – The Leica DISTO™ A5 is your ever-reliable partner. Ergonomic design with soft rubber grip Fits perfectly in the hand, with soft rubber grip to ensure a firm hold. Robust enough for outdoor use The integrated optical viewfinder simplifies targeting over long distances Multi-function flip-out end piece The built in sensor automatically determines the correct zero point.   Feature Your benefit  Measuring range of 0.05 up to 200m (0.16 up to 650ft); type. accuracy ± 1.5mm (± 0.06in)  Fast and accurate measurement of short and long distances  Power Range Technology™   Allows measuring of long distances (approx. 100m) without target plate  Ergonomic design with soft rubber grip  Instrument fits well in the hand  Integrated viewfinder with 2x magnification  Ideal for measurement of longer distances  Room calculations  Maximum results with minimum effort, no more manual calculations  Indirect height-/width measurement  Measurement of inaccessible locations  Shortcut keys  Extra-simple operation  IP54  Splash and dust proof - important for all professionals   Your shipment will include: DISTO™ A5 Radian Laser Glasses User Manual Holster Wrist Strap 2 AA Batteries Reference Videos: Straight Line Single Measurement Continuous Straight Line Tracking (Streaking off Distance) Longest to Shortest Distance Area Function Volume Function 2 Point Pythagorean 3 Point Pythagorean 3 Point Partial Pythagorean   New! - Price Match Guarantee on All Leica Disto Products.  As long as a Disto is advertised as a New Disto, we will match it. http://www.flexible-borescope.com/gwsimages/740689-leica-disto-a5.jpg 449.00 740689 740689 new 2009-12-31 740689 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+a6.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+a6.html   The communicative one for in-/outdoors   Bluetooth® data transfer - for a reliable transfer of measured values   The measuring process on the Leica DISTO™ A6 isn’t over with the display of the results:  integrated BLUETOOTH® technology, combined with software designed to let you export measurement readings straight into various programs (e.g. Word® Excel®, AutoCad®) without the use of cables. Take the hard work out of measuring – it is fun now! Wireless transfer via Bluetooth® Forget paper and pencil now! DISTO™ transfer Transmits your measured values without wires to your Pocket PC od laptop for further processing - with the program of your choice. The application operates in the background, so will not even notice it running. See the FAQ about the Disto Transfer software below. Navigation keys control the cursor movement in the software with the Leica DISTO™ A6 and leave the pen of your Pocket PC in its holder!       Features Your advantages Measuring range of 0.05 up to 200m (0.16 up to 650ft); typ. accuracy ± 1.5 mm (± 0.06in) Fast and accurate measurement of short and long distances Power Range Technology™   Allows measuring of long distances (approx. 100m) without target plate Integrated viewfinder with 2x magnification Indispensable for measurements outside esp. at bright sun lights Integrierted BLUETOOTH® technology Wireless and reliable data transfer to Pocket PCs and PCs DISTO™ transfer Free software which sends the measured values reliably to Excel®, Word®, AutoCad® and many other softwares. Navigation keys Direct control of the cursor movements IP54 Splash and dust proof - important for all professionals   Your shipment will include: DISTO A6 Radian Laser Glasses User Manual Holster Wrist Strap 2 AA Batteries Disto Transfer Software FAQ Which system requirements does my PC need to work with DISTO™  transfer? Generally the DISTO™  transfer works on all desktops, labtops, tablet PCs and UMPCs equiped with Microsoft Windows SE, ME, XP or Vista. Of course the computer must have a Bluetooth interface or you have to install a Bluetooth stick. Using an external Bluetooth stick the computer must fullfil the requirements of the Bluetooth stick. Which system requirements does my PDA need to work with DISTO™  transfer? The DISTO™  transfer works on PDAs with Bluetooth interface as long it has Windows Mobile 2003 SE respectivelly 2005 or Windows Mobile 5.0 and Windows Mobile 6.0 installed. Very good expertience we have with PDA devices from HP.Of course to install DISTO™  transfer on a PDA a PC is required. On this PC Microsoft ActiveSync needs to be installed in order to download DISTO transfer to the PDA. Does DISTO™  transfer support the use of Apple Mac computers? No it doesn't. To use your Leica DISTO™ with an Apple Mac you need to buy a software from a third party developer. Does DISTO™  transfer support the use of Palm pocket PC? No it doesn't. To use your Leica DISTO™ with a Palm you need to buy a software from a third party developer. Does DISTO™  transfer support the use of mobile phone like Blackberry or Smartphone with Windows Mobile 6.0? DISTO™  transfer does not work on mobile phones except of Smartphones with Windows Mobile 6.0. Please note that these Smartphone only have a reduced version of Excel which limits the comfort for use with the Leica DISTO™. Another limiting factor is the T9 predictive text technology. What is DISTO™  transfer and how does this work? DISTO™ transfer is a program which once started is running in the background. Data which are send from a Leica DISTO™  device are collected by the transfer software and this simulates a keyboard entry to the active window. So the value will transfered in any application window that is active in the position of the cursor. This very versatile procedure that you can use your Leica DISTo with almost every Windows application. You only need to select the format you want to receive the data (with units, enter (in Excel the cursor jumps to the cell below), tabulator (in Excel the cursor jumps to the cell to the right)). Which limitations does the Bluetooth technology have for the use with Leica DISTO™  ? Bluetooth is a standard for wireless tranfser of data. The Leica DISTO™ is working with Bluetooth class 2 which alows to transfer data to a computer in a range of 0,3 and 10m (so do not put the Leica DISTO™  on your computer because the connection might drop off). The maximum range will not be achieved if you want to transfer data e.g. through walls. You also have to take care that the connection remains between the measurements. If the connection drops and you are coming back into the specified range the connection will be build up again after a few seconds. If you are transfering data when the units are not connected you will receive a error message. In this case wait for the reconnection and send the data again. Generally problems with connectivity can occur when you are working with many WIFI devices working at the same time (e.g. Hotel lobbies, meeting or seminar rooms, ...) Does my software for the Leica DISTO™  plus also work with a Leica DISTO™  A6? DISTO™  transfer works with both instruments. The plusDraw and plusXL sontware only workd with the DISTO™  plus. When you are using any software of a third party developer with your DISTO™  plus and you are switching to the DISTO™  A6 it may happen that it will not work properly. in this case please ask your software supplier for an update. Can I use the DISTO™  transfer program together with more than one Leica DISTO™ ? Yes you can. You have to start the Bluetooth setup with all instruments switched on (Bluetooth also on). All DISTOs will be displayed with the corresponding com-port it will be connected to. You have now to start DISTO™  transfer mutiple times and each transfer will connect to a different DISTO. please note that from all transfer programms the data will be transfered in the active window. I have installed the DISTO™  transfer software on my computer but it is not working properly. So the connection is not build up, data are not transfered even the devices are connected or I am getting error messages on my DISTO™ . What can I do? DISTO™  transfer supports the Bluetooth driver (stack) of Broadcom (Widcomm) and Microsoft (coming as standard with your Windows operating system). Sometimes when you buy a computer you will receive it preinstalled from the manufacturer. There it can happen that a manufacturer is using a different Bluetooth driver from another software provider. It might happen that you will have problems with the connectivity of your devices. In this case you will have to open the Control Panel and chose Add/Remove programs. If there is another driver than Widcomm or from Microsoft installed please select it and remove it from your computer. Make sure your Bluetooth is switched on and restart your computer. The Bluetooth module should be detected from the Windows and it will suggest to install the standard driver. Please click yes and follow the furtehr instructions. Which other software is available to use with my Leica DISTO™  A6? There are numerous provider of specific software which supports Leica DISTO™  existing. The combination of a good software and Leica DISTO™  only make the real customer beneftit. Please contact us for a list ofthird party software available. http://www.flexible-borescope.com/gwsimages/751962-leica-disto-a6-front.jpg 599.00 751962 751962 new 2009-12-31 751962 tools Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+a8.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+a8.html     The visionary one – for in and outdoors   With digital viewfinder and tilt sensor – simply perfect!   The digital viewfinder and the integrated tilt sensor make the Leica DISTO™ A8 an innovation worldwide and open up completely new possibilities. Comfortably find your target with the three-fold digital zoom made even easier with the blended in crosshairs. The brightness of the greyscales display can be manually adjusted; ideal for poorly contrasting targets! The tilt sensor does not only indicate angles, but also real horizontal distances and various indirect height measurements. Brochures and Manuals:   Leica Disto A8 User Manual - Download Leica Disto A8 Brouchure - Download Leica Disto A5, A6, A8 Pythagoras Special Use Help - Download Leica Disto Family Brouchure - Download Features: Tilt sensor Any tilt can be easily measured by just placing the housing on the slope. Digital viewfinder (3-fold zoom) Essential for far distances and in sunshine. Indirect height measurements By using the tilt sensor and the digital viewfinder, heights can be determined in the first measurement even without reflecting the laser beam.   Features Your advantages Measuring range of 0.05 m/0.16 ft up to 200 m/650 ft; typ. accuracy ± 1.5 mm/ ± 0.06 in Precise, fast and reliable measurements Power Range Technology™ Measure over long distances (approx. 100 m) without target plate Digital viewfinder with 3-fold zoom Easy measurements in sunshine and to far away targets Tilt sensor Measure tilts by setting the housing on the object Indirect tilt measurements Height measurements, e.g. without reflecting the laser beam through the tilt sensor Indirect height / distance measurements Measure to inaccessible areas – at the press of the button, more detailed information will be available Greyscales display Best contrast possible; 9 brightness settings available  IP54 Spray water and dust proof – essential for construction sites   Scope of Delivery: Leica - Disto A8  Radian Laser Glasses Holster Batteries User Manual Safety Instructions Calibration Certificate (Quality confirmation with serial no., inspection date and measurement deviation for distances and inclinations) DISTO A8 FAQ How accurate is the inclination sensor in the Leica DISTO™ A8? The accuracy of the inclination sensor to the laser beam is +/- 0.15° and +/-0.3° towards the bottom of the housing. Depending on the measured angle and the distance the accuracy varies. E.g in measuring an angle of 10° and a distance of 10m the horizontal mistake is 0.5cm and the mistake in height is 2.6cm. If an angle is measured of 60° and a distance of 10m the horizontal mistake is 2.3cm and the mistake in height is 1.3cm.  In order to have best results with indirect measurements considering the deviation of the inclination sensor use the Leica DISTO™ A8 as follows. For measuring distances use the instrument as flat as possible. If you need to measure heights use the instrument as steep as possible. What different units for inclination are integrated in the Leica DISTO™ A8? The Leica DISTO™ A8 offers a variety of commonly international used units for inclination measurements. The enduser has the opportunity to individually choose from the following options: +/- 90.00°, +/-180.00°, +/-360.00°, 0.00%, 0.0 mm/m and 0.00 in/ft (equivalent to a pitch).  Is it also possible to measure indirect heights starting at the bottom of the object as well? Yes, function two behind the indirect measurement key can be measured both ways. It does not matter if the  first measurement is the top of the object and then the bottom or if the first measurement is the bottom of the object and the second one the top, both ways are possible. What are the advantages of the calibration certificate that is included in each Leica DISTO™ A8? The included calibration certificate is a great use for each customers that is using the device in measuring applications for officials. It is standardized after EN 10201-3.1. The documented values were measured with accredited devices in our laboratory. More information especially to the subject recalibration you find on our website under Support/FAQs.   Is it possible to get some detailed information on the measurements I have completed? Yes, it is possible to get detailed information of the completed measurements for the following functions integrated in the Leica DISTO™ A8: area, volume, and on all functions behind the indirect measurement key. If you press the function key you are in again for a longer time you will receive detail information of the completed measurement.  Compared to the Leica DISTO™ A5 what are the new features the Leica DISTO™ A8 offers? Compared with the Leica DISTO™ A5 on the A8 there are two new keys on the keypad. First of all instead the optical viewfinder which was integrated in the Leica DISTO™ A5 the A8 now has a digital viewfinder with 3fold digital zoom. That opens complete new measurement possibilities especially in difficult lighting conditions.  Additionally behind the indirect measurement key you will find a numerous variety of new possibilities besides the well known Pythagoras. This is also possible due to the new integrated inclination sensor. What accessories are necessary to use with the Leica DISTO™ A8 ? It is strongly recommended to use the Leica DISTO™ A8 with a tripod which really helps to make the measurements more accurate by providing a stable reference for longer distances and exact aiming.  Can the Leica DISTO™ A8 be used for horizontal angles? No, the inclination sensor only allows measuring vertical angles by holding the instrument with the display upwards. If you skip the instrument by more than 20° sideways it you will get an error message on the display. For which segments is the Leica DISTO™ A8 a great help in day to day business? The Leica DISTO™ A8 is the perfect measuring help for several different target groups just to mention a few of them it would be: Scaffolding, Forestry and Wood companies, cable companies, telecom, underground construction, crane builders, carpenters, joiners, architects and many more. http://www.flexible-borescope.com/gwsimages/740691-leica-disto-a8-front.jpg 799.00 740691 740691 new 2009-12-31 740691 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d2.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d2.html New! - Price Match Guarantee on All Leica Disto Products.  As long as a Disto is advertised as a New Disto, we will match it. Free Quint Measuring Systems 7in. Pocket  Angle Finder with every DISTO order. Free Laser Glasses with the purchase of the Disto D2 Leica DISTO™ D2 - Instock! Ships the Same Day if Ordered before 5:00p.m. EST The small partner - for indoor applications Three Year Warranty! Measuring distances and calculating results with the smallest laser distance meter of the world. The compact and handy base model was specifically designed for indoor applications. Shortcut keys for addition, subtraction, area and volume calculation make measuring fast and very reliable. The last 10 measurements are also stored. As with all Leica laser distance meters, the laser dot is clearly visible. You can always see your targeting point, even if the target object is in a hard to access area. Leica DISTO™ D2 – you will never use a measuring tape again!  Downloads User Manual - Download Product Description - Download Disto Family Brochure - Download   Quick and easy Measure distances at the touch of a button and calculate areas or volumes.       Measure from edges or corners With the flip-out end-piece you are equipped for any measuring situation.       Small and handy Thanks to its ergonomic and compact design with soft grip, the Leica DISTO™ D2 sits securely in your hand and fits into any pocket.       Clear display The results are shown on a 3-line display. The illuminated display is easily readable, even in the dark.       Simply clever Minimum / maximum measurements, tracking and storage of results makes your work much easier.        Included items - practical and clever: holster: stows everything away neatly hand loop: secures the instrument at all heights   Features Your advantages Measuring range 0.05 m up to 60 m; typ. accuracy ± 1.5 mm Precise, fast and reliable indoor measurements Shortcut keys Easy-to-use and rapid access to frequently used functions Illuminated 3-line display Measured values can be read even in the dark Flip-out end-piece Measure from edges or corners Stake out function Stake-out equal distances Time delay release Measure without shake Simple Pythagorean functions Indirect height and width measurements for inaccessible positions IP 54 Splash and dust proof Your Shippment Will Include: Disto D2 Holster Batteries Hand loop Producer certificate User manual Safety instructions     http://www.flexible-borescope.com/gwsimages/763495-Leica-Disto-D2-200-200.jpg 199.00 763495 763495 new 2009-12-31 763495 Consumer Electronics Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d210xt.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d210xt.html Leica DISTO D210XT Tough enough!   The Leica DISTO D210XT is the only laser distance meter, which is protected against jet water and is absolutely tight against dust - according to IP 65. This ensures, that it operates precisely, even at very unpleasant conditions.             Dust-proof and jet water protected IP65 The housing and keypad are specially sealed against water and dust. Cleaning under running water is no problem.           Robust The sensitive measuring elements are protected by solid rubber parts. The Leica DISTO D210XT is therefore particularly resistant and endures drop tests from 2m height.           Multifunctional end-piece Whether measuring out of corners, slots or from edges, with this endpiece you are prepared for all measuring situations. The instrument detects the endpiece automatically, which helps you to avoid expensive measuring errors.           Functionality The Leica DISTO D210XT has a diverse range of functions, e.g. addition, subtraction, area, volume, Pythagoras, continuous measurement and minimum/maximum measurement.           Included items - practical and clever: Holster Hand loop 2 AA batteries CD with manual / safety instructions Quickstart guide Features Your advantages Measuring range 0.05 to 70 m Typ. accuracy +/- 1.5 mm Precise, quick and reliable measurements. Sealed keypad For measurements in extremely dusty environments. Easy to clean under running water. Solid rubber housing Endures drop tests from 2 m height. Hard-wearing, illuminated display Measured values can be read, even in the dark. Flip-out end-piece with automatic detection Reliable, trouble free and error free measurement from edges or out of corners. Minimum and maximum measurement function Horizontal and diagonal measurements, e.g. in corners. Room dimensions Values such as circumference, wall area, floor or ceiling area are displayed at the touch of a button. Continuous measurement Simple and quick staking out. IP65 Dust-proof and jet water protected . http://www.flexible-borescope.com/gwsimages/Leica-DISTO-DXT-standing-front-01.jpg 219.00 776110 776110 new 2009-12-31 776110 Consumer Electronics Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d3.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d3.html   The multi-talented one – for interior application NEW - 3 Year Warranty Measure distances and tilts simple, quick and reliable - with the smallest Laser Distance Meter of the world! The Leica DISTO™ D3 is a multi-functional instrument to ensure simple, quick and reliable measurements. You can measure distances with absolute accuracy, past obstructions and determine angles quickly and precisely. The integrated tilt sensor also provides you with a horizontal distance measurement. Another sensor detects the lighting conditions and automatically switches on the display and keypad illumination. You can rely on your Leica DISTO™ D3 while working in the dark. Measuring made easy – your versatile partner with a modern look!  Leica Disto D3 Brochure - Download Leica Disto D3 User Manual - Download   Tilt measurement The instrument's inbuilt tilt sensor quickly and simply determines tilts up to ± 45°. The tilt sensor can also provide you with true horizontal distances. Reliable measurements are therefore guaranteed.         Multifunctional end piece Aim the instrument straight at the target point, whether measuring out of corners, slots or from edges: with this end piece you are prepared for all measuring situations. The instrument detects the end piece automatically, which helps you avoid expensive measuring errors.         Automatic keypad and display illumination A built-in sensor detects if the environment is dark and switches on the illumination of the keypad and display. You can also measure in the dark without any problem.         Multiple functions The Leica DISTO™ D3 can also calculate areas, volumes, room dimensions and various types of Pythagorean functions. A time delay release and enough memory for up to 20 measurements finish off the instruments wide range of functions – a concept designed to make your work easier.         Included items - practical and clever: Holster: Stows everything away neatly Target plate: Allows accurate measurement on a non-reflective surface. Wrist strap: Secures the instrument at all heights Features Your advantages Measuring range 0.05 up to 100 m (0.16 up to 328 ft); typical accuracy ± 1.0 mm (0.04 in) Fast and accurate distance measurements on detailed display Power Range Technology™ Measure over long distances (approx. 80 m) without target plate Tilt measurements Measure angles up to ± 45° at the touch of a button Indirect measurements with the help of the tilt sensor Horizontal distances can be measured without problem despite nearby obstructions Flip-out endpiece with automatic detection Reliable, trouble-free measurement from edges or out of corners Room calculations Values like total wall length, wall and ceiling areas are available at the touch of button Room angle calculation Exact calculation of a room angle from only three measurements Scope of delivery:  Leica DISTO™ D3 Radian Laser Glasses Holster Batteries Wrist strap Target plate Safty Instructions User Manual Quickstart Disto D3 FAQ How accurate is the tilt sensor in the Leica DISTO™ D3?  The accuracy of the tilt sensor is +/- 0.3° to the laser beam and +/-0.3° to the housing. The accuracy varies according to the measured angle and distance. The horizontal distance error (fd) and the height error (fh) can be calculated as follows:  fd = horizontal distance error d = measured distance a = angle at which the distance is measured fa = possible angular error fd = d * cos (a) – d * cos (a + fa)  For example, if a distance of 10m is measured at an angle of 10°, the error on the direct horizontal distance (fd) is 9mm.  If a distance of 10m is measured an angle of 45°, the error on the direct horizontal distance (fd) is 37mm.  To obtain the best result using indirect measurement and minimise the deviation, the device should be held as close to the horizontal as possible.   What is the angular range of the tilt sensor in the Leica DISTO™ D3? The integral tilt sensor in the Leica DISTO™ D3 functions in the range +/- 45° and at a transverse tilt of > +/- 10°. The display indicates if the tilt is in the range >+/- 50°. A line appears on the display with the text max. and an infocode i 160, which means that the device is being used outside its permissible range. If the device is held at > +/- 10° transversely, a similar line appears on the display, which indicates the transverse tilt with the text “max”. The infocode i 156 indicates that the device is tilted too much and that you should be aware that inaccurate measurements would be taken.     What units of tilt are integrated into the Leica DISTO™ D3?  You can set the Leica DISTO™ D3 to use different units of tilt. The user can select between ° and %. The units can be changed in menu item 2 Can a Leica DISTO™ D3 be calibrated by the user?  The user can calibrate the device’s tilt sensor. The angle sensor is switched on by pressing the function key once. Then two measurements are taken on a flat surface. The first measurement is taken and a note is made of the measured angle a. The device is then turned through exactly 180°, the second measurement is taken and a note is made of the measured angle b. The value x to which the device must be corrected is calculated as follows:  x = -(a+b) /2  The calibration mode is then entered by pressing keys “Clear Off” and the “Function key” both at the same time for 2 seconds. The correction value x can be entered here using the “plus” and “minus” keys. The entered value is stored and implemented by pressing the “Menu/=” key.   Is it possible to obtain detailed information about the measurements taken?  Yes, it is possible to obtain detailed information about the measurements of areas and volumes in the Leica DISTO™ D3: After the measurements have been taken (area/volume), the “Area/Volume” key must be held down and then detailed information about the measurements carried out is shown in the display.    What accessories are recommended for the Leica DISTO™ D3?  For long distances we recommend using a tripod, even indoors. A tripod provides additional steadiness and therefore allows accurate targeting, especially over long distances. We particularly recommend the Leica TRI100 tripod. Can the Leica DISTO™ D3 also be used to measure horizontal angles? No, the integral tilt sensor can only measure vertical angles. If the device is held at a transverse tilt angle greater than +/-10° the display shows an infocode 156, which means that the device is required to be held level (transversely). Which customer segment would find the Leica DISTO™ D3 of most use for everyday tasks?  The Leica DISTO™ D3 is a great measurement aid for a wide range of target groups and is a superbly multitalented device for indoor tasks. The device is particularly suitable, but of course not exclusively, for the following users: architects, interior architects, electricians, carpenters, kitchen installers, floor layers, joiners, heating engineers, window installers, decorators and many others. Can the automatic key and display illumination be switched off from the device?  The automatic key and display illumination can be switched off in menu item 6. If the sensor is switched off, the device no longer illuminates the keys or display. Can the historical storage memory in the device be erased?  The historical storage memory in the device can be erased by pressing the “Clear Off” and “Storage” keys (both pressed at the same time and held for 2 seconds).    http://www.flexible-borescope.com/gwsimages/759946 -D3_front_reflection_US.jpg 299.00 759946 759946 new 2009-12-31 759946 Consumer Electronics Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d330.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d330.html Leica DISTO D330 Can it measure that accurately? With a measuring accuracy of +/- 1.0 mm, the Leica DISTO D330 offers high precision at the touch of a button. The large, illuminated display shows the measurement results and supplementary information clearly and legibly. Smart Horizontal Mode Inclination measurement (+/- 45 degrees) Illuminated 4-line display Multifunctional end-piece Robust with IP 54 Power Range Technology   Smart Horizontal Mode Thanks to the combination of distance and tilt measurements you can determine the horizontal distance precisely and simply. If you take a measurement at an inclination of +/-45 degrees, the Leica DISTO D330 always calculates the shortest distance. So you can measure quickly and easily, even over the top of objects and people. Multiple functions The Leica DISTO D330 can calculate rectangular and triangular areas, volumes, room dimensions and various types of Pythagoras functions. A time delay release and enough memory for up to 20 measurements round off the instrument's wide range of functions - a concept designed to make your work life easier. Multifunctional endpiece Aim the instrument straight at the target point, whether measuring out of corners, slots or from edges: with this endpiece you are prepared for all measuring situations. The instrument detects the endpiece automatically, which helps you avoid expensive measuring errors. Power Range Technology The integrated Power Range Technology makes measuring long distances very easy. You can measure up to 80 m without a target plate and even up 100 m with a target plate, without having to take single step. Brilliant and clearly arranged display The results are displayed on the large (2 inch), clearly arranged and high contrast display. At the touch of a button, the display makes supplementary information available about the measurements, e.g. indirect height, room dimensions, angle information or room angles. Included items: Holster Hand loop 2 AA batteries CD with manual / safety instructions Producer certificate M in accordance with DIN 55350-18-4.2.2 Quickstart guide   Features Your advantages Measuring range 0.05 to 100 m Typ. accuracy +/- 1.0 mm Precise, quick and reliable measurements Smart Horizontal Mode Determine precise horizontal distances at the press of a key Tilt sensor Measure angles up to +/- 45 degrees at the touch of a button Flip-out end-piece with automatic detection Reliable, trouble-free and error-free measurement from edges or out of corners Pythagoras functions Indirect height and width measurements in inaccessible positions Room dimensions Values such as total wall length, wall and ceiling area are available at the touch of a button Stake out function Stake out equal or two different recurring distances Triangle function Determine the area of a many-cornered room efficiently   Disto D330 FAQ - Get a closer look at the D330 How accurate is the tilt sensor in the Leica DISTO D330? The accuracy of the inclination sensor in the device is +/- 0.3 degrees to the laser beam respectively +/- 0.3 degrees to the housing of the device. How can I check if the tilt sensor of my device is still within the described specifications (+/- 0.3 degrees)? The tilt sensor has to be switched on. On an absolute flat surface the first measurement has to be made. (please note angle a). Afterwards the device has to be turned around 180 degrees and the second measurement has to be made. (please note angle b). Now angle a and angle b are added up and divided by 2. If this value falls within +/- 0.3 degrees the tilt sensor of the device is within the described specification. What is the angular range of the tilt sensor in the Leica DISTO D330? The integral tilt sensor in the Leica DISTO D330 functions in the range +/- 45 degrees and at a transverse tilt of < +/- 10 degrees. The display indicates if the tilt is in the range +/- 50 degrees a line appears on the display with the text max. and an info code i 160, which means that the device is being used outside its permissible range. If the device is held at > +/- 10 degrees transversely, a similar line appears on the display, which indicates the transverse tilt with the text "max". The info code i 156 indicates that the device is tilted too much. What units of tilts are integrated into the Leica DISTO D330? You can set the Leica DISTO D330 to use different tilt units. The user can select between degrees and %. These can be changed in the menu. Can the inclination sensor of a Leica DISTO D330 be calibrated by the user? The user can calibrate the device's tilt sensor. The angle sensor is switched on by pressing the "Function key" once. Take two measurements on an absolutely flat surface. The first measurement is taken and a note is made of the measured angle a. The device is then turned through exactly 180 degrees, the second measurement is taken and a note is made of the measured angle b. The value x to which the device must be corrected is calculated as follows: x = - (a+b) /2 The calibration mode is then entered by pressing keys "Clear Off" and the "Function key" both at the same time for 2 seconds. The correction value x can be entered here using the "Plus" and "Minus" keys. The entered value is stored and implemented by pressing the "Menu/=" key. Is it possible to obtain detailed information about the measurements taken? Yes, it is possible to obtain detailed information within the Leica DISTO D330 about the measurements of areas and volumes. After the measurements have been taken (area/volume), the "Area/Volume" key must be held down and then detailed information is shown in the display. What accessories are recommended for the Leica DISTO D330? For long distances we recommend using a tripod, even indoors. A tripod provides additional steadiness and therefore allows accurate targeting, especially over long distances. We particularly recommend the Leica TRI100 tripod. You will need to set within the menu button that the Leica DISTO D330 is now measuring from the tripod thread. Can the Leica DISTO D330 also be used to measure horizontal angles? No, the integral tilt sensor can only measure vertical angles. If the device is held at a transverse tilt angle greater than +/-10 degrees the display shows an info code 156, which means that the device is required to be held level (transversely). What is the measuring accuracy when using the direct horizontal measuring function? For example, if a distance of 10m is measured at an angle of 10 degrees, the error on the direct horizontal distance (fd) is 9mm. If a distance of 10m is measured at an angle of 45 degrees, the error on the direct horizontal distance (fd) is 37mm. In order to have best results with indirect measurements considering the deviation of the inclination sensor use the Leica DISTO D330 as follows. For measuring distances use the instrument as flat as possible. The horizontal distance error (fd) and the height error (fh) can be calculated as follows: fd = horizontal distance error fh = error in height d = measured distance a = angle at which the distance is measured fa = possible angular error fd = d * cos (a) - d * cos (a + fa) fh= d * sin (a) - d * sin (a + fa) Further information and a table of measuring accuracies you can find in the FAQ Measuring Accuracy. Which customer segment would find the Leica DISTO D330 of most use for everyday tasks? The Leica DISTO D330 is a great measurement aid for a wide range of target groups and is a superbly multi-talented device for indoor tasks. The device is particularly suitable, but of course not exclusively, for the following users: architects, interior surveyors, electricians, carpenters, kitchen installers, flooring contractors, joiners, heating engineers, window installers, decorators and many others. Can the display illumination be switched off from the device? The display illumination can be switched off in the menu. Can the historical storage memory in the device be erased? The historical storage memory in the device can be erased by pressing the "Clear Off" and "Storage" keys (both pressed at the same time and held for 2 seconds). How can I get an extra year’s warranty for the Leica DISTO D330 ? Our standard warranty of 2 years can be extended by one additional year if you register your device on the website disto.com within eight weeks of the purchase date. If the product is not registered, a two year warranty applies. http://www.flexible-borescope.com/gwsimages/Disto-D330-200-200.jpg 329.00 776149 776149 new 2009-12-31 776149 Consumer Electronics Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d330i+with+bluetooth.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d330i+with+bluetooth.html With BLUETOOTH Technology and Smart Horizontal Mode   The Leica DISTO D330i is available with BLUETOOTH technology, so measurement results can be wirelessly and accurately transferred to Pocket PCs and PCs. Furthermore, the Leica DISTO D330i is equipped with "Smart Horizontal Mode, tilt sensor, calculation possibilities for rectangular and triangular areas, volumes, room dimensions and various types of Pythagoras functions.           Smart Horizontal Mode Thanks to the combination of distance and tilt measurements you can determine the horizontal distance precisely and simply. If you take a measurement at an inclination of +/- 45 degrees, the Leica DISTO D330i always calculates the shortest distance. So you can measure quickly and easily, even over the top of objects and people.           Multiple functions The Leica DISTO D330i can calculate rectangular and triangular areas, volumes, room dimensions and various types of Pythagoras functions. A time delay release and enough memory for up to 20 measurements round off the instrument's wide range of functions - a concept designed to make your work life easier.           Brilliant and clearly arranged display The results are displayed on the large (2"), clearly arranged and high contrast display. At the touch of a button, the display makes supplementary information available about the measurements, e.g. indirect height, room dimensions, angle information or room angles.           BLUETOOTH With integrated BLUETOOTH technology, measurement results can be wirelessly and accurately transferred to Pocket PCs and PCs. Thus you can easily process your data in Excel, Word, AutoCAD and other programs.           Free DISTO Transfer Software The delivery package contains the transfer software "Leica DISTO Transfer" - easy to install and with automatic updates. The AutoCAD plug-in additionally allows convenient planning and drawing with your AutoCAD software.           Included items - practical and clever: Holster Hand loop 2 AA batteries Target plate CD with manual / safety instructions Producer certificate M in accordance with DIN 55350-18-4.2.2 Quickstart guide CD with Leica DISTO Transfer for PC and PPC, AutoCAD PlugIn Features Your advantages Measuring range 0.05 to 100 m Typ. accuracy +/- 1.0 mm Precise, quick and reliable measurements BLUETOOTH Error-free and quick data transfer to Pocket PC or PC Leica DISTO Transfer software is included  Easy transfer for further processing in Excel, Word, AutoCAD or other Windows-based programs AutoCAD plug-In Convenient drawing using your AutoCAD software Smart Horizontal Mode Determine precise horizontal distances at the press of a key Tilt sensor Measure angles up to +/- 45 degrees at the touch of a button Flip-out end-piece with automatic detection Reliable, trouble-free and error-free measurement from edges or out of corners Pythagoras functions Indirect height and width measurements in inaccessible positions Room dimensions Values such as total wall length, wall and ceiling area are available at the touch of a button Stake out function Stake out equal or two different recurring distances Triangle function Determine the area of a many-cornered room efficiently   Disto D330i FAQ - Get a closer look at the D330i How accurate is the tilt sensor in the Leica DISTO D330i? The accuracy of the inclination sensor in the device is +/- 0.3 degrees to the laser beam respectively +/- 0.3 degrees to the housing of the device. How can I check if the tilt sensor of my device is still within the described specifications (+/- 0.3 degrees)? The tilt sensor has to be switched on. On an absolute flat surface the first measurement has to be made. (please note angle a). Afterwards the device has to be turned around 180 degrees and the second measurement has to be made. (please note angle b). Now angle a and angle b are added up and divided by 2. If this value falls within +/- 0.3 degrees the tilt sensor of the device is within the described specification. What is the angular range of the tilt sensor in the Leica DISTO D330i? The integral tilt sensor in the Leica DISTO D330i functions in the range +/- 45 degrees and at a transverse tilt of < +/- 10 degrees. The display indicates if the tilt is in the range +/- 50 degrees a line appears on the display with the text max. and an info code i 160, which means that the device is being used outside its permissible range. If the device is held at > +/- 10 degrees transversely, a similar line appears on the display, which indicates the transverse tilt with the text 'max'. The info code i 156 indicates that the device is tilted too much. What units of tilts are integrated into the Leica DISTO D330i? You can set the Leica DISTO D330i to use different tilt units. The user can select between degrees and %. These can be changed in the menu. Can the inclination sensor of a Leica DISTO D330i be calibrated by the user? The user can calibrate the device's tilt sensor. The angle sensor is switched on by pressing the 'Function key' once. Take two measurements on an absolutely flat surface. The first measurement is taken and a note is made of the measured angle a. The device is then turned through exactly 180 degrees, the second measurement is taken and a note is made of the measured angle b. The value x to which the device must be corrected is calculated as follows: x = - (a+b) /2 The calibration mode is then entered by pressing keys 'Clear Off' and the 'Function key' both at the same time for 2 seconds. The correction value x can be entered here using the 'Plus' and 'Minus' keys. The entered value is stored and implemented by pressing the 'Menu/=' key. Is it possible to obtain detailed information about the measurements taken? Yes, it is possible to obtain detailed information within the Leica DISTO D330i about the measurements of areas and volumes. After the measurements have been taken (area/volume), the 'Area/Volume' key must be held down and then detailed information is shown in the display. What accessories are recommended for the Leica DISTO D330i? For long distances we recommend using a tripod, even indoors. A tripod provides additional steadiness and therefore allows accurate targeting, especially over long distances. We particularly recommend the Leica TRI100 tripod. You will need to set within the menu button that the Leica DISTO D330i is now measuring from the tripod thread. Can the Leica DISTO D330i also be used to measure horizontal angles? No, the integral tilt sensor can only measure vertical angles. If the device is held at a transverse tilt angle greater than +/-10 degrees the display shows an info code 156, which means that the device is required to be held level (transversely). What is the measuring accuracy when using the direct horizontal measuring function? For example, if a distance of 10m is measured at an angle of 10 degrees, the error on the direct horizontal distance (fd) is 9mm. If a distance of 10m is measured at an angle of 45 degrees, the error on the direct horizontal distance (fd) is 37mm. In order to have best results with indirect measurements considering the deviation of the inclination sensor use the Leica DISTO D330i as follows. For measuring distances use the instrument as flat as possible. The horizontal distance error (fd) and the height error (fh) can be calculated as follows: fd = horizontal distance error fh = error in height d = measured distance a = angle at which the distance is measured fa = possible angular error fd = d * cos (a) - d * cos (a + fa) fh= d * sin (a) - d * sin (a + fa) Further information and a table of measuring accuracies you can find in the FAQ Measuring Accuracy. Which customer segment would find the Leica DISTO D330i of most use for everyday tasks? The Leica DISTO D330i is a great measurement aid for a wide range of target groups and is a superbly multi-talented device for indoor tasks. The device is particularly suitable, but of course not exclusively, for the following users: architects, interior surveyors, electricians, carpenters, kitchen installers, flooring contractors, joiners, heating engineers, window installers, decorators and many others. Can the display illumination be switched off from the device? The display illumination can be switched off in the menu. Can the historical storage memory in the device be erased? The historical storage memory in the device can be erased by pressing the "Clear Off" and "Storage" keys (both pressed at the same time and held for 2 seconds). How can I get an extra year's warranty for the Leica DISTO D330i ? Our standard warranty of 2 years can be extended by one additional year if you register your device on the website disto.com within eight weeks of the purchase date. If the product is not registered, a two year warranty applies. http://www.flexible-borescope.com/gwsimages/Leica-DISTO-D3a-BT-front-reflection-PIC.jpg_Media.jpg 379.00 776748 776748 new 2009-12-31 776748 Consumer Electronics Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d5.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d5.html Leica DISTO D5 Your powerful partner for outdoors   World First: Digital Pointfinder with 4x Zoom! The Leica DISTO D5 is designed with many functions and features to make measuring easier, particularly when you are working outdoors. Leica Disto D5 Manual - Download Leica Disto D5 Brochure - Download Leica Disto D5 Press Release - Download         Digital Pointfinder The integrated digital Pointfinder with a 4x zoom and 2.4" color display makes finding the target at long distances much easier. Its high resolution capability provides a sharp, crystal-clear image, which allows measurements to be taken even in glaring sunshine.         Tilt sensor Thanks to the in-built tilt sensor, you can quickly and simply measure tilts up to +/- 45 degrees. The tilt sensor also allows you to measure absolutely horizontally or measure past obstructions (horizontal distance).         Power Range Technology The integrated Power Range Technology allows you to measure long distances very simply. Measure up to 100 m without a target plate, and even up to 200 m using a target plate, without having to take a single step.         Spot-on measurement The laser makes it possible! The laser dot is clearly visible, therefore you always know exactly where you are measuring, which is especially useful in difficult to access places. So you can take absolutely precise measurements, even over long distances.         Details displayed Additional information about the measurements, e.g. room dimensions or angles, is available at the touch of a button.         Included items – practical and clever: Holster Hand loop 2 AA batteries Manual / safety instructions Producer certificate M in accordance with DIN 55350-18-4.2.2 Quickstart guide Now that you have Bought your Disto D5! Watchs some Videos to see how to use it! Straight Line Measurements Single Measurement - Video Link Longest or Shortest Distance - Video Link Continuous Tracking - Video Link Staking - Video Link Area - Video Link Volume - Video Link Pythagoras Functions Point to Point (Two Measurements) - Video Link Point to Point (Three Measurements) - Video Link Point to Point (Partial Height or Width) - Video Link Indirect Measurement Functions Tilt Measurement - Video Link Single Tilt Horizontal Distance - Video Link Trapezium Functions Trapeziod (Three Measurement) - Video Link Trapezoid (Two Measurement) - Video Link Triangular Measurement - Video Link Digital Viewfinder - Video Link Helpful Tips - Video Link Features Your advantages Measuring range of 0.05 m / 0.16 ft up to 200 m / 650 ft; typ. accuracy +/- 1.0 mm / +/- 0.04 in Precise, quick and reliable measurements Digital Pointfinder with 4x zoom and high resolution color display Convenient measuring to distant objects, even in strong sunlight Power Range Technology Measure long distances, up to 100 m without and 200 m with a target plate Tilt sensor Measure vertical angles up to +/- 45 degrees at the touch of a button Horizontal distance measurement using the tilt sensor It's no problem to determine distances despite obstructions Trapezium function Simple and quick measurement of roof slopes and facade areas Pythagorean functions Indirect height and width measurements at inaccessible positions Detailed display Additional measurement information available at a touch of a button, e.g. angle information *) US-Version with a typ. Accuracy +/- 1,5 mm (+/- 0.06 in) Scope of delivery: 764550 Leica DISTO D5 764553 Leica DISTO D5 US-Version Disto D5 FAQ - Get a Closer Look at the D5 How many zoom levels does the Leica DISTO D5 have? The integrated digital Pointfinder in the device has 1x, 2x and 4x zoom. You can see on the left up corner which zoom level you have selected. To change from one zoom level to the next one you have to press the "Digital Pointfinder" key . Can the brightness in the digital Pointfinder be adjusted? Yes, on the screen of the digital Pointfinder on top of the crosshair you see a symbol existing of a "Sun" and a "+" and "-". By pressing the "Plus" and "Minus" key you are able to adjust the brightness in 5 steps. Why is the laser dot on distance on short distances not centered in the crosshair? It is the parallax effect due to the distance between the laser window and the digital pointfinder optics. This effect occurs only when the digital pointfinder is used on targets below 10m. In this case the laser dot appears displaced in reference to the crosshair. This is not an error !! For distances below 10m please rely on the real laser dot. How accurate is the tilt sensor in the Leica DISTO D5? The accuracy of the tilt sensor in the device is +/- 0.3 degrees to the laser beam respectively +/- 0.3 degrees to the housing of the device. What units of tilts are integrated into the Leica DISTO D5? You can set the Leica DISTO D5 to use different tilt units. Select in the menu the submenu "Units" and choose between degrees , %, in/ft and mm/m. -> The level function in the right hand top corner of the display can also be switched on/off in the submenu "level". It is always set to 0.0 degrees and can not be changed into a different unit for tilts. What is the angular range of the tilt sensor in the Leica DISTO D5? The integrated tilt sensor in the Leica DISTO D5 functions in the range +/- 45 degrees and at a transverse tilt of < +/- 10 degrees. If the tilt is in the range > +/- 50 degrees an info code "i160" appears in the display, which means that the device is being used outside its permissible range. If the device is held at > +/- 10 degrees transversely, the info code "i156" appears in the display and indicates that the device is tilted too much. What has to be considered in the Trapezoid Function 2? The inclination sensor in the Leica DISTO D5 is limited to +/- 45 degrees. So the second measurement can only be done if the angle is < +/- 45 degrees. ,If the angle is > +/- 50 degrees you will get the info code "i160". Can the tilt sensor of a Leica DISTO D5 be calibrated by the user? You can recalibrate the zero level of the integrated tilt sensor. In the menu there is a special point for this calibration. If you enter this submenu you will be guided through the process. Please now proceed the following: Put the device on a nearly horizontal flat surface (e.g.table) 1. Carry out the first measurement by pressing "ON/DIST" key on a level surface. The device confirms the measurement. 2. Rotate the device horizontally 180 degrees. 3. Press the "=/Menu" key to confirm that the device was rotated 180 degrees. 4. Press the "ON/DIST" key and take the second measurement. The device confirms the measurement. -> The zero level of the tilt sensor is now calibrated Is it possible to obtain detailed information about the measurements taken? Yes, it is possible to obtain detailed information in the Leica DISTO D5 about the measurements of areas, volumes, Pythagorean and trapezoid functions. After the measurements have been taken, keep the relevant function key pressed. A small red triangle on the bottom left hand of the display is showing that there are 2nd Results available. What accessories are recommended for the Leica DISTO D5? Leica Tripod TRI100 For long distances we recommend using a tripod, even indoors. A tripod provides additional steadiness and therefore allows accurate targeting, especially over long distances. We particularly recommend the Leica TRI100 tripod. Target Plate For measurement especially outdoors and in very bright conditions it is very helpful to use a target plate. We offer different versions in our accessory range. Can the Leica DISTO D5 also be used to measure horizontal angles? No, the integrated tilt sensor can only measures vertical angles. If the device is held at a transverse tilt angle greater than +/- 10 degrees the display shows an info code "i156", which means that the device is required to be held level (transversely). What is the measuring accuracy when using the direct horizontal measuring function? For example, if a distance of 10m is measured at an angle of 10 degrees, the error on uncertainty on measurement on the direct horizontal distance (fd) is 9mm. If a distance of 10m is measured at an angle of 45 degrees, the uncertainty of measurement on the direct horizontal distance (fd) is 37mm. -> in order to have best results with the direct horizontal distance measurements, considering the deviation of the tilt sensor, use the Leica DISTO D5 as flat as possible. The horizontal distance error (fd) and the height error (fh) can be calculated as follows: fd = horizontal distance error fh = error in height d = measured distance a = angle at which the distance is measured fa = possible angular error fd = d * cos (a) – d * cos (a + fa) fh= d * sin (a) – d * sin (a + fa) Further information and a table of measuring accuracies you can find online in the FAQ under "Measuring Accuracy". Which customer segment would find the Leica DISTO D5 of most use for everyday tasks? The Leica DISTO D5 is a great measurement tool for a wide range of target groups and is a superbly device especially designed for outdoor tasks. The device is particularly suitable, but of course not exclusively, for the following users: Architects, General Construction, Painter, Facade Workers, Joiner, Fireman, Surveyors, Facility Managers, Civil Engineer, Real Estate, Gardening Companies, Educational Institutions, Electrical Services, Insurance Companies, Scaffolding, Telecommunications, Police, etc. .. What is the circle on the keypad above the "Timer" key? The Leica DISTO D5 has a sensor to detect the brightness of the display. If the device is used outside in bright sunshine this sensor automatically adjusts the brightness for the display to save energy. Additionally an adjustment can be made in the menu. In the relevant submenu the brightness of the entire display can be adjusted in 6 steps. Can the historical storage memory of 20 values  in the device be erased? Yes, the historical storage memory in the device can be erased by pressing the "Clear Off" and "Storage" keys - both pressed at the same time and held for 2 seconds. Which batteries should I use for the Leica DISTO D5? In general you can use any alkaline battery or any rechargeable batteries (2xAA). In the scope of delivery we provide high quality batteries and we recommend to use such batteries or any (NiMH) batteries. Can I enter a value that is constantly added / subtracted to my measured value? (Offset) Yes, in the "Menu" you can go to the "Offset Icon" and enter a value that will constantly be added / subtracted from your measured distance value. If an offset value is entered you will see the adequate symbol -  a triangle with plus or respectively minus next to the laser symbol. -> If you want to set the offset value back to zero, enter the menu point "Offset" and press the "Clear/Off" key. Can I adjust / edit the constant to a number that I continuously need for further measurements? Yes, the saved constant "C" can be adjusted to any desired number that is required. Go to the constant by pressing the "Memory" key once. Now press the "=/Menu" key long. The constant value’s background is changing to show deep grey. Now you can adjust the constant with the "Plus" and "Minus" key to any desired value. Press the "=/Menu" key short to save the new entered value. The constant "C" is now saved. What is the Long Range (LR) Mode? For long distances under unfavorable conditions (e.g. long distances and very bright sunlight) we recommend to use the special integrated Long Range (LR) Mode . To select the mode please enter the menu and select the "LR Mode". If the "LR Mode" is turned on in the menu you will see the letter "LR" right next to the laser symbol. This mode will allow you to make measurements that were not possible before because most of the time you would receive the info code "i255" (too less signal). When using this special Long Range (LR) Mode the measuring time increases (it may take up to 7sec) and above 30m the maximum deviation increases to +/- 0.15mm/m. How do I know if the device is still measuring in the digital Pointfinder mode? When using the digital Pointfinder in any function, especially in the Long Range (LR) Mode, you will see a clock icon on the top of the display. The clock stays in the display until the measurement is finished. Please do not move the device before! http://www.flexible-borescope.com/gwsimages/764550-main-pic.jpg 499.00 764553 764553 new 2009-12-31 764553 tools Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d8.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+d8.html The versatile one for in- and outdoor NEW: The most versatile laser distance meter in the world! Equipped with a digital Pointfinder, high-resolution 2.4" color display, 360° tilt sensor and bluetooth® technology. Leica DISTO™ D8 is a real world first and offers completely new measuring options. Instock and will ship same day if ordered before 5pm EST!   Disto D8 User Manual       360° tilt sensor The combination of angle and distance measurements allows you to determine distances where conventional methods fail. The horizontal distance, for example, can also be determined quickly and efficiently past obstacles or the elevation of a tree, even though there is no reflective point.           Digital Pointfinder Thanks to the digital Pointfinder with its 4x zoom and high resolution 2,4“ colour display, you can measure long range distances quickly and easily because you always see your targeted point.           BLUETOOTH® With integrated BLUETOOTH® technology, measurement results can be wirelessly and accurately transferred to Pocket PCs and PCs. Thus you can easily process your data in Excel®, Word®, AutoCAD® and other programs.           Free software The delivery package contains the transfer software “Leica DISTO™ Transfer” – easy to install and with automatic updates. The AutoCAD® plug-in additionally allows convenient planning and drawing with your AutoCAD® software.           Included items – practical and clever: Holster Hand loop 2 AA batteries Target plate Manual / safety instructions Producer certificate M in accordance with DIN 55350-18-4.2.2 Quickstart guide CD with Leica DISTO™ Transfer for PC and PPC, AutoCAD® PlugIn  Features Your advantages Measuring range of 0.05 m / 0.16 ft up to 200 m / 650 ft; typ. accuracy ± 1.0 mm / ± 0.04 in Precise, quick and reliablemeasurements BLUETOOTH® Error-free and quick data transfer to Pocket PC or PC “Leica DISTOTM Transfer” software is included Easy transfer for further processing in Excel®, Word®, AutoCAD® or other Windows-based programs AutoCAD® plug-In Convenient drawing using your AutoCAD® software 360° tilt sensor Measure any slope, even overhead Digital Pointfinder with 4x zoom and high resolution colour display Convenient measurement of distant objects, even in bright sunlight Indirect measurement functions with tilt sensor Determine distances to objects that cannot be measured directly because they lack reflective points Height profile measurements Determine spot heights and ground profiles Now that you have bought your Leica Disto D8 learn how to use it! Here are some detailed videos of all of the advanced features. Start Here! - Video Link Straight Line Single Measurement - Video Link Longest or Shortest Distance - Video Link Continuous Tracking - Video Link Staking - Video Link Area - Video Link Cubic Volume - Video Link Pythagoras Functions Point to Point (Two Measurement) - Video Link Point to Point (Three Measurement) - Video Link Point to Point (Partial Height or Width) - Video Link Indirect Measurement Functions Tilt Measurement - Video Link Single Tilt Horizontal Distance (Obstruction Feature) - Video Link Double Tilt Measurement 1 (One Measured Distance) - Video Link Double Tilt Measurement 2 (Two Measured Distance) - Video Link Profile Measurement - Video Link Trapezium Functions Trapeziod 1 (Three Measurement) - Video Link Trapezoid 2 (Two Measurement) - Video Link Triangular Measurement - Video Link Digital Viewfinder (4x Zoom) - Video Link Helpful Tips - Video Link Have a closer look at the Disto D8  How many zoom levels does the Leica DISTO™ D8 have? The integrated digital Pointfinder in the device has 1x, 2x and 4x zoom. You can see on the left up corner which zoom level you have selected. To change from one zoom level to the next one you have to press the “Digital Pointfinder” key. Can the brightness in the digital Pointfinder be adjusted? Yes, on the screen of the digital Pointfinder on top of the crosshair you see a symbol existing of a “Sun” and a “+” and “-“. By pressing the “Plus” and “Minus” key you are able to adjust the brightness in 5 steps. Why is the laser dot on distance on short distances not centered in the crosshair? It is the parallax effect due to the distance between the laser window and the digital Pointfinder optics. This effect occurs only when the digital Pointfinder is used on targets below 10m. In this case the laser dot appears displaced in reference to the crosshair. This is not an error !! For distances below 10m please rely on the real laser dot. How accurate is the tilt sensor in the Leica DISTO™ D8? The accuracy of the tilt sensor in the device is ±0.1° to the housing of the device. To the laser beam the maximum deviation can be up to -0.1° and +0.2°. This applies at room temperature (20°C - 30°C). At any other temperatures the maximum deviation increases by ±0.1°. What units of tilts are integrated into the Leica DISTO™ D8? You can set the Leica DISTO™ D8 to use different tilt units. Select in the menu the submenu “Units” and choose between ° , %, in/ft and mm/m. -> The level function in the right hand top corner of the display can also be switched on/off in the submenu “level”. It is always set to 0.0° and can not be changed into a different unit for tilts. What is the angular range of the tilt sensor in the Leica DISTO™ D8? The integrated tilt sensor in the Leica DISTO™ D8 functions at any angle (360°) and at a transverse tilt of < ±10°. If the device is held at > ±10° transversely, the info code “i156” appears in the display and indicates that the device is tilted too much. Can the tilt sensor of a Leica DISTO™ D8 be calibrated by the user? You can recalibrate the zero level of the integrated tilt sensor. In the menu there is a special point for this calibration. If you enter this submenu you will be guided through the process. Please now proceed the following: Put the device on a nearly horizontal flat surface (e.g.table) 1. Carry out the first measurement by pressing “ON/DIST” key on a level surface. The device confirms the measurement. 2. Rotate the device horizontally 180°. 3. Press the “=/Menu” key to confirm that the device was rotated 180°. 4. Press the “ON/DIST” key and take the second measurement. The device confirms the measurement. -> The zero level of the tilt sensor is now calibrated Is it possible to obtain detailed information about the measurements taken? Yes, it is possible to obtain detailed information in the Leica DISTO™ D8 about the measurements of areas, volumes, Pythagorean and trapezoid functions, indirect measurements and triangle areas. After the measurements have been taken, keep the relevant function key pressed. A small red triangle on the bottom left hand of the display is showing that there are 2nd Results available. What accessories are recommended for the Leica DISTO™ D8? Leica Tripod TRI100 For long distances we recommend using a tripod, even indoors. A tripod provides additional steadiness and therefore allows accurate targeting, especially over long distances. We particularly recommend the Leica TRI100 tripod. Target Plate For measurement especially outdoors and in very bright conditions it is very helpful to use a target plate. We offer different versions in our accessory range. Adaptor for attachment to the pole and the tripod (LSA360) For using the Leica DISTO™ on a set up pole as it is used e.g. for GPS applications we recommend the use of this adaptor. The reference point for measurements is the back of the Leica DISTO™. The lateral offset of the DISTO™ on the adaptor to the center of the pole varies due to the different pole diameters. The LSA360 can also be used on the middle column of the Leica TRI100 (tripod head can be removed). Doing indirect measurements from there will increase the accuracy because laser axis of the Leica DISTO™ and tilting axis of the Leica TRI100 are both at the same height level at the back of the Leica DISTO™. The lateral offset of the LSA360 to the center of the pole depends on the diameter of the used pole (11mm pole -> 66.9mm offset, 15mm pole -> 69.2mm offset, 20mm pole -> 72mm offset, 25mm pole -> 74.9mm offset, 30mm pole -> 77.8mm offset, 35mm pole -> 80.7mm offset). Can the Leica DISTO™ D8 also be used to measure horizontal angles? No, the integrated tilt sensor can only measures vertical angles. If the device is held at a transverse tilt angle greater than ±10° the display shows an info code “i156”, which means that the device is required to be held level (transversely). What is the measuring accuracy when using the indirect measuring functions including tilt sensor? For example, if a distance of 10m is measured at an angle of 10°, the error on uncertainty on measurement on the direct horizontal distance (fd) is 3mm. If a distance of 10m is measured at an angle of 45°, the uncertainty of measurement on the direct horizontal distance (fd) is 12mm. -> in order to have best results with the direct horizontal distance measurements, considering the deviation of the tilt sensor, use the Leica DISTO™ D8 as flat as possible. The horizontal distance error (fd) and the height error (fh) can be calculated as follows: fd = horizontal distance error fh = error in height d = measured distance a = angle at which the distance is measured fa = possible angular error fd = d * cos (a) – d * cos (a + fa) fh= d * sin (a) – d * sin (a + fa) Further information and a table of measuring accuracies you can find online in the FAQ under “Measuring Accuracy”. Which customer segment would find the Leica DISTO™ D8 of most use for everyday tasks? The Leica DISTO™ D8 is a great measurement tool for a wide range of target groups and is a superbly device especially designed for outdoor tasks and/or use to transfer data into computers. The device is particularly suitable, but of course not exclusively, for the following users: Architects, Surveyors, Facility Managers, Civil Engineer, Real Estate, General Construction, Scaffolding, Painters, Facade Workers, Joiners, Firemen, Gardening Companies, Educational Institutions, Electrical Services, Insurance Companies, Telecommunications, Police, etc. What is the circle on the keypad above the “Bluetooth®” key? The Leica DISTO™ D8 has a sensor to detect the brightness of the display. If the device is used outside in bright sunshine this sensor automatically adjusts the brightness for the display to save energy. Additionally an adjustment can be made in the menu. In the relevant submenu the brightness of the entire display can be adjusted in 6 steps. Can the historical storage memory of 30 values  in the device be erased? Yes, the historical storage memory in the device can be erased by pressing the “Clear Off” and “Storage” keys - both pressed at the same time and held for 2 seconds. Which batteries should I use for the Leica DISTO™ D8? In general you can use any alkaline battery or any rechargeable batteries (2xAA). In the scope of delivery we provide high quality batteries and we recommend to use such batteries or any (NiMH) batteries. Please note that it is not allowed to use Lithium-Ion rechargeable batteries in your Leica DISTO™. Can I enter a value that is constantly added / subtracted to my measured value? (Offset) Yes, in the “Menu” you can go to the “Offset Icon” and enter a value that will constantly be added / subtracted from your measured distance value. If an offset value is entered you will see the adequate symbol -  a triangle with plus or respectively minus next to the laser symbol. -> If you want to set the offset value back to zero, enter the menu point “Offset” and press the “Clear/Off” key. Can I adjust / edit the constant to a number that I continuously need for further measurements? Yes, the saved constant “C” can be adjusted to any desired number that is required. Go to the constant by pressing the “Memory” key once. Now press the “=/Menu” key long. The constant value’s background is changing to show deep grey. Now you can adjust the constant with the “Plus” and “Minus” key to any desired value. Press the “=/Menu” key short to save the new entered value. The constant “C” is now saved. What is the Long Range (LR) Mode? For long distances under unfavorable conditions (e.g. long distances and very bright sunlight) we recommend to use the special integrated Long Range (LR) Mode . To select the mode please enter the menu and select the “LR Mode”. If the “LR Mode” is turned on in the menu you will see the letter “LR” right next to the laser symbol. This mode will allow you to make measurements that were not possible before because most of the time you would receive the info code “i255” (too less signal). When using this special Long Range (LR) Mode the measuring time increases (it may take up to 7sec) and above 30m the maximum deviation increases to ±0.15mm/m. How do I know if the device is still measuring in the digital Pointfinder mode? When using the digital Pointfinder in any function, especially in the Long Range (LR) Mode, you will see a clock icon on the top of the display. The clock stays in the display until the measurement is finished. Please do not move the device before! Can I use the profile measurement only in a horizontal line? No, you can use this function in any horizontal position. This allows you to use the Leica DISTO™ D8 as one person operating digital level. The accuracy depends mainly on the used distance and the accuracy of the inclination sensor. For usage up to 10m on a 1.5m tripod height deviations of up to 17mm are possible. Additional deviations are possible depending on the tripod that is used (due to distance between laser axis and tilt axis of tripod), best results will be achieved by using the adaptor LSA360 on a middle column of a tripod. When using the Leica DISTO™ D8 over larger distances (>10m) we recommend to measure on a vertical target plate like e.g. the setup target plate in the scope of delivery. Please note, measure the reference point and all other points on the same height and this height is automatically compensated! What reference do I have to enter when using the profile measurement? After selecting this function you have first the possibility to enter a height for the reference point. This allows you to enter an absolute height that might be available of the reference point. This can either be the height of the reference point above sea level or more common a height that is based to another known reference point in a system (e.g. the reference point in level 1 is 3.503m above the reference point in level 0). For simple comparison measurements just leave it at zero. Does the double tilt measurement with two measured distances only works on back bent objects? No, there is no limitation regarding fore or back bent objects in using this function. The only thing is that you need to stand straight in front of the measured object (no horizontal angles are considered in calculation). This fact makes this function to one of the most versatile ones in the whole laser distance measurer industry. - Measure the length of a pitched object (stand straight in front of the object, main result) - Measure the pitch of the object (stand straight in front of the object, 2nd result) - Measure the horizontal distance of two objects you can not measure direct horizontally (stand straight in front of the object, 2nd result) - Measure the height difference of two points that are not in a vertical line (2nd result) Can I use the Leica DISTO™ D8 to measure overhead? Yes, with the Leica DISTO™ D8 you can measure any angle, even overhead. Only when using indirect measuring functions with tilt sensor you have to use the device in a range for angles of +/- 90°. Which system requirements does my PC need to work with DISTO™ transfer? Generally the Leica DISTO™ transfer works on all desktops, laptops, tablet PCs and UMPCs equipped with Microsoft Windows SE, ME, XP or Vista. Of course the computer must have a Bluetooth® interface or you have to install a Bluetooth® stick. Using an external Bluetooth® stick the computer must fulfill the requirements of the Bluetooth® stick. Which system requirements does my PDA need to work with DISTO™ transfer? The DISTO™  transfer works on PDAs with Bluetooth® interface as long it has Windows Mobile 2003 SE respectively 2005 or Windows Mobile 5.0 and Windows Mobile 6.0 installed. Very good experience we have with PDA devices from HP. Of course to install DISTO™  transfer on a PDA a PC is required. On this PC Microsoft ActiveSync needs to be installed in order to download DISTO™ transfer to the PDA. Does DISTO™ transfer support the use of Apple Mac computers? No it doesn't. To use your Leica DISTO™ with an Apple Mac you need to buy a software from a third party developer. Does DISTO™ transfer support the use of Palm pocket PC? No it doesn't. To use your Leica DISTO™ with a Palm you need to buy a software from a third party developer. Does DISTO™ transfer support the use of mobile phone like Blackberry or Smart phone with Windows Mobile 6.0? DISTO™ transfer does not work on mobile phones except of Smart phones with Windows Mobile 6.0. Please note that these Smart phone only have a reduced version of Excel which limits the comfort for use with the Leica DISTO™. Another limiting factor is the T9 predictive text technology. What is DISTO™ transfer and how does this work? DISTO™ transfer is a program which once started is running in the background. Data which are send from a Leica DISTO™ device are collected by the transfer software and this simulates a keyboard entry to the active window. So the value will be transferred in any application window that is active in the position of the cursor. This very versatile procedure that you can use your Leica DISTO™ with almost every Windows application. You only need to select the format you want to receive the data (with units, enter (in Excel the cursor jumps to the cell below), tabulator (in Excel® the cursor jumps to the cell to the right)). Which limitations does the Bluetooth® technology have for the use with Leica DISTO™? Bluetooth® is a standard for wireless data transfer. The Leica DISTO™ is working with Bluetooth® class 2 which allows to transfer data to a computer in a range of 0,3 and 10m (so do not put the Leica DISTO™  on your computer because the connection might drop off). The maximum range will not be achieved if you want to transfer data e.g. through walls. You also have to take care that the connection remains between the measurements. If the connection drops and you are coming back into the specified range the connection will be build up again after a few seconds. If you are transferring data when the units are not connected you will receive an error message i240. In this case wait for the reconnection and send the data again. Generally problems with connectivity can occur when you are working with many WIFI devices working at the same time (e.g. hotel lobbies, meeting or seminar rooms, ...) Which Bluetooth® driver are supported by Leica DISTO™ transfer PC? Leica DISTO™ transfer PC supports directly the Bluetooth® driver from Microsoft® and Broadcom® (Widcomm-driver). If your computer is working with a different driver you can uninstall it (Control panel -> Remove programs) and restart your computer. Follow the instruction to install the recommended Microsoft® driver. Alternatively you can start the program Leica DISTO™ transfer – Bluetooth install. Further instructions and the name of the installed driver are displayed in a new window. Click for using a virtual Bluetooth COM-interface. Use the Bluetooth manager to create the connection (pair). If you are asked to enter a code please type in the field „0000“. The connection between the Leica DISTO™ and your PC should be established automatically each time you are starting Leica DISTO™ transfer. Can I use the DISTO™ transfer program together with more than one Leica DISTO™? Yes you can. You have to start the Bluetooth® setup with all instruments switched on (Bluetooth® also on). All DISTO™s will be displayed with the corresponding com-port it will be connected to. You have now to start DISTO™ transfer multiple times and each transfer will connect to a different DISTO™. please note that from all transfer programs the data will be transferred in the active window. Can I use my Leica DISTO™ together with AutoCAD®? Yes you can. During the installation of Leica DISTO™ transfer PC it will be checked whether you are having an AutoCAD® installation on your computer. If this is the case an AutoCAD® plugIn will be installed. This plugIn enables you to draw layouts by using the navigation keys and by transfering measurement data from the Leica DISTO™ to the PC. If you are using the angle tracking function on the Leica DISTO™ D8 AutoCAD® calculates the horizontal distance each time for the layout. If the measured angle is >75° the distance is interpreted as a height and the calculated vertical height is added to the drawing. When going into 3D display mode in AutoCAD® you can see the 3D layout. Please note that the transferred height is only used for the current measurement chain. How can I install the AutoCAD® PlugIn subsequently? When you are starting the Leica DISTO™ transfer program it will be checked whether there is a AutoCAD® installation on the computer. If this is the case the plugIn will be installed automatically. How do I have to start the AutoCAD® PlugIn? Start the AutoCAD® program and type the command „leicadisto“ into the command line of AutoCAD® . Leica DISTO™ transfer will automatically be started. http://www.flexible-borescope.com/gwsimages/DistoD8-D8_front_reflection_ft2.jpg 799.00 764558 764558 new 2009-12-31 764558 tools Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+carrying+case.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+carrying+case.html The perfect bag for keeping your DISTO safe from rain and dust. Plenty of room for your Pocket PC or Palm Pilot, too. http://www.flexible-borescope.com/gwsimages/DISTO_BAG-leica-disto-soft-bag-carrying-case.jpg 49.00 667169 667169 new 2009-12-31 667169 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+corner+target+plate.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+corner+target+plate.html Leica Disto Stick-On Target Plates  allows the Disto units to shoot to their maximum distance Leica Disto Stick-On Target Plate is a reusable target plate that you can stick onto a corner. Two different sized targets are included. Target plate held in place with kneading adhesive. For interior craftsmen like shopfitters. Target plate held in place with kneading adhesive.     http://www.flexible-borescope.com/gwsimages/DISTO_CORNER_TARGET-leica-disto-corner-target-plate.jpg 35.00 723774 723774 new 2009-12-31 723774 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+large+target+plate.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+large+target+plate.html The perfect target for measuring with a DISTO™. While target plates ARE NOT NECESSARY when measuring with a DISTO™, they can be helpful in certain situations. Easily take measurements from 650 – 800 feet. http://www.flexible-borescope.com/gwsimages/L_TARGET_PLATE-leica-disto-large-target-plate.jpg 35.00 723385 723385 new 2009-12-31 723385 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+tri+100+tripod+and+case.html http://www.flexible-borescope.com/product/leica+geosystems+-+tri+100+tripod+and+case.html Leica Geosystems - TRI 100 Tripod and Case Quick release for ease of mounting. Quality tripod with very easy fine adjustment. Robust Tilt head for fast and smooth adjustments. Professional quality tripod with simple fine adjustment. Also suitable for Leica Disto A5, A6 and A8. Carrying Case with shoulder straps and accessory pocket. Flip levers on legs for ease of adjustment. Screw type levelling devices on each leg. Specifications: Carrying softcase. Height: 72cm-172cm. Weight: 5.95Oz. http://www.flexible-borescope.com/gwsimages/757938-Leica-TRI-100-Tripod.jpg 79.00 757938 757938 new 2009-12-31 757938 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+velbon+df-40+-+2+axis+tripod+with+crank+up.html http://www.flexible-borescope.com/product/leica+geosystems+-+velbon+df-40+-+2+axis+tripod+with+crank+up.html Leica Geosystems - Velbon DF-40 - 2 Axis Tripod with Crank Up Velbon (DF-40) Tripod dual function lightweight: Maximum height: 57"; folded length: 21". Weight: 2.6 lbs. Quick-release. Geared center column. 3-section, 20mm tubular aluminum legs. Steel ground spikes with adjustable rubber tipped feet. Lightweight, dual-function tripod. Max operating height 57 in. Closed length 21.3 in. Supported devices Camera, Camcorder Tripod features Built-in bubble level Tripod head positioning 3-way Quick release system Yes Tripod center column type Geared Tripod Weight 2.6 lbs http://www.flexible-borescope.com/gwsimages/8211754-Leica Disto Velbon DF40.jpg 49.00 8211754 8211754 new 2009-12-31 8211754 Consumer Electronics Leica Geosystems http://www.flexible-borescope.com/product/radians+red+lens+laser+safety+glasses.html http://www.flexible-borescope.com/product/radians+red+lens+laser+safety+glasses.html Radians Safety Glasses - Laser - Red Lens Safety Glasses - RV0180ID Radians RV0180ID Black Frame Vermillion Red Lens Safety Glasses are the best for enhancing contrast. They are great for people who need to see certain details in their jobs where they work outside in the sun or glare. Reading instruments is one such situation where they would be of benefit. These Radians RV0180ID Black Frame Vermillion Red Lens Safety Glasses have Vermillion scratch-resistant lenses that are made to increase and enhance contrast. They are also great for shooting, as they enhance target sighting of the red alignment or leveling beam. They allow 33% visible light transmission, so you are not completely in the dark with them on. They weigh less than one ounce, have durable 5-position ratcheting temples that adjust to your head, and a soft, non-slip rubber nose piece that fits your nose perfectly. The RV0180ID lenses provide 99% UVA and UVB protection. They are ANSI Z87.1+ certified for safety glasses. Radians RV0180ID Black Frame Vermillion Red Lens Safety Glasses are perfect for both male and female surveyors, engineers, and other similar workers who read instruments or gauges outside where glare is an issue. Glare is always an issue for us, so we are all buying a pair of these glasses! We expect that you will want a pair, too. Reserve yours today. Product Includes: 1 x Laser Safety Glasses http://www.flexible-borescope.com/gwsimages/RV0180ID-Radians-Safety-Glasses-Laser-Red-Lens-Safety-Glasses-RV0180ID.jpg 29.95 RV0180ID RV0180ID new 2009-12-31 RV0180ID Radians http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+battery+cover+for+disto+a2.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+battery+cover+for+disto+a2.html Leica Geosystems - Disto - Battery Cover for Disto A2 http://www.flexible-borescope.com/gwsimages/750710-battery_cover_a2.jpg 9.00 750710 750710 new 2009-12-31 750710 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+battery+cover+for+disto+a3.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+battery+cover+for+disto+a3.html Leica Geosystems - Disto - Battery Cover For Disto A3   http://www.flexible-borescope.com/gwsimages/739838-battery_cover_a3.jpg 9.00 739838 739838 new 2009-12-31 739838 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+black+end+peice+for+locking+a5+-+a6+-+a8.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+black+end+peice+for+locking+a5+-+a6+-+a8.html Leica Geosystems - Disto - Black End Peice for Locking A5 - A6 - A8 http://www.flexible-borescope.com/gwsimages/739789-locking_clip.jpg 5.00 739789 739789 new 2009-12-31 739789 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+classic+3+endcap+-+endpeice.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+classic+3+endcap+-+endpeice.html Endpeice / Endcap for Leica Disto Classic 3 http://www.flexible-borescope.com/gwsimages/733404-DISTOPART_l.jpg 35.00 733404 733404 new 2009-12-31 733404 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+end+piece+-+endcap+-+disto+a5.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+end+piece+-+endcap+-+disto+a5.html Leica Geosystems - Disto - End Piece - Endcap - Disto A5 http://www.flexible-borescope.com/gwsimages/739801-endpiece_a5.jpg 15.00 739801 739801 new 2009-12-31 739801 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+end+piece+-+endcap+-+disto+a6.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+end+piece+-+endcap+-+disto+a6.html Leica Geosystems - Disto - End Piece - Endcap - Disto A6 http://www.flexible-borescope.com/gwsimages/751318-endpiece_a6.jpg 22.00 751318 751318 new 2009-12-31 751318 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+end+piece+-+endcap+-+disto+a8.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+end+piece+-+endcap+-+disto+a8.html Leica Geosystems - Disto - End Piece - Endcap - Disto A8 http://www.flexible-borescope.com/gwsimages/739794-endpiece_a8.jpg 22.00 739794 739794 new 2009-12-31 739794 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+hand+loop+-+for+all+distos.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+hand+loop+-+for+all+distos.html Leica Geosystems - Disto - Hand Loop - For All Distos http://www.flexible-borescope.com/gwsimages/732574-handloop.jpg 5.00 732574 732574 new 2009-12-31 732574 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+holster+-+disto+a2.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+holster+-+disto+a2.html Leica Geosystems - Disto - Holster - Disto A2 http://www.flexible-borescope.com/gwsimages/752827-holster_a2.jpg 16.00 752827 752827 new 2009-12-31 752827 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+holster+-+disto+a3.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+holster+-+disto+a3.html Leica Geosystems - Disto - Holster - Disto A3 http://www.flexible-borescope.com/gwsimages/743346-holster_a3.jpg 16.00 743346 743346 new 2009-12-31 743346 Leica Geosystems http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+holster+a5+-+a6+-+a8.html http://www.flexible-borescope.com/product/leica+geosystems+-+disto+-+holster+a5+-+a6+-+a8.html Leica Geosystems - Disto - Holster A5 - A6 - A8 http://www.flexible-borescope.com/gwsimages/743347-holster_a5.jpg 16.00 743347 743347 new 2009-12-31 743347 Leica Geosystems http://www.flexible-borescope.com/product/stabila+-+ld-500+laser+measure.html http://www.flexible-borescope.com/product/stabila+-+ld-500+laser+measure.html Digital Pointfinder with 4x Zoom! The Stabila LD500 is designed with many functions and features to make measuring easier, particularly when you are working outside.  • Its large, high resolution color display presents the measurement results and additional information in an easy to read format. • A host of functions help you quickly and precisely to resolve almost any measurement situation. • A robust housing gives optimum protection against splash water and dust. Digital Pointfinder The integrated digital Pointfinder with a 4x zoom and 2.4"color display makes finding the target at long distances much easier. Its high resolution capability provides a sharp, crystal-clear image, which allows measurements to be taken even in glaring sunshine. Tilt sensor Thanks to the in-built tilt sensor, you can quickly and simply measure tilts up to ± 45º. The tilt sensor also allows you to measure absolutely horizontally or measure past obstructions (horizontal distance). Power Range Technology™  The integrated Power Range Technology™ allows you to measure long distances very simply. Measure up to 330 ft. without a target plate, and even up to 650 ft using a target plate, without having to take a single step. Spot-on measurement The Laser make it possible! The laser dot is clearly visible, therefore you always know exactly where your are measuring, whick is especially useful in difficult to access places. So yo can take absolutely precise measurements, even over long distances. Details displayed Additional information about the measurements, e.g. room dimensions or angles, is available at the touch of a button.   Features Your advantages Measuring range of 0.05 m / 0.16 ft up to 200 m / 650 ft; typ. accuracy ± 1.0 mm / ± 0.04 in Precise, quick and reliable measurements Power Range Technology™ Measure long distances, up to 100 m without and 200 m with a target plate Digital Pointfinder with 4x zoom and high resolution color display Convenient measuring to distant objects, even in strong sunlight Tilt sensor Measure vertical angles up to ± 45° at the touch of a button Horizontal distance measurement using the tilt sensor It's no problem to determine distances despite obstructions Trapezium function Simple and quick measurement of roof slopes and facade areas Pythagorean functions Detailed display Indirect height and width measurements at inaccessible positions Additional measurement information available at a touch of a button, e.g. angle information   APPLICATIONS Real Estate, Insurance, Appraisers Painters Gardening Companies Carpenters Joiners Flooring Construction workers Educational Institutions Electrical Services Insurance companies Scaffolding Architects Telecommunications Police Suveyor Facillity Manager others   http://www.flexible-borescope.com/gwsimages/Stabila LD500 Profile.jpg 499.99 06500 06500 new 2009-12-31 08963406500-5 Stabila http://www.flexible-borescope.com/product/voscope+-+3+watt+blue+uv+led+flashlight.html http://www.flexible-borescope.com/product/voscope+-+3+watt+blue+uv+led+flashlight.html VOscope - 3 Watt Blue UV LED Flashlight http://www.flexible-borescope.com/gwsimages/85003-no-image.jpg 67.43 85003 85003 new 2009-12-31 85003 tools VOScope http://www.flexible-borescope.com/product/voscope+-+3+watt+white+led+flashlight.html http://www.flexible-borescope.com/product/voscope+-+3+watt+white+led+flashlight.html VOscope - 3 Watt White LED Flashlight http://www.flexible-borescope.com/gwsimages/85002-no-image.jpg 67.43 85002 85002 new 2009-12-31 85002 tools VOScope http://www.flexible-borescope.com/product/voscope+-+5.8mm+hologen+bulb.html http://www.flexible-borescope.com/product/voscope+-+5.8mm+hologen+bulb.html VOscope - 5.8mm Hologen Bulb http://www.flexible-borescope.com/gwsimages/VO-1-no-image.jpg 15.00 VO-1 VO-1 new 2009-12-31 VO-1 tools VOScope http://www.flexible-borescope.com/product/voscope+-+90+degree+mirror.html http://www.flexible-borescope.com/product/voscope+-+90+degree+mirror.html VOscope - 90 Degree Mirror Options: MIR-10 - Works with all 10mm Scopes MIR-6 - Works with all 6mm Scopes MIR-4 - Works with all 4mm Scopes http://www.flexible-borescope.com/gwsimages/VO_Scope_Accessory.jpg 25.00 MIR MIR new 2009-12-31 MIR tools VOScope http://www.flexible-borescope.com/product/voscope+-+c+camera+coupler.html http://www.flexible-borescope.com/product/voscope+-+c+camera+coupler.html VOscope - C Camera Coupler http://www.flexible-borescope.com/gwsimages/45001-45001-alt.jpg 108.57 45001 45001 new 2009-12-31 45001 tools VOScope http://www.flexible-borescope.com/product/voscope+-+c+mount+and+color+camera.html http://www.flexible-borescope.com/product/voscope+-+c+mount+and+color+camera.html VOscope - C Mount and Color Camera http://www.flexible-borescope.com/gwsimages/45002-45002-shown-with-coupler.jpg 514.29 45002 45002 new 2009-12-31 45002 tools VOScope http://www.flexible-borescope.com/product/voscope+-+magnet.html http://www.flexible-borescope.com/product/voscope+-+magnet.html VOscope - Magnet Options: MAG-10 - Works with all 10mm Scopes MAG-6 - Works with all 6mm Scopes MAG-4 - Works with all 4mm Scopes http://www.flexible-borescope.com/gwsimages/MAG-no-image.jpg 25.00 MAG MAG new 2009-12-31 MAG tools VOScope http://www.flexible-borescope.com/product/voscope+-+replacement+carrying+cases.html http://www.flexible-borescope.com/product/voscope+-+replacement+carrying+cases.html VOscope - Replacement Carrying Cases Options: VT100 - VT Series Case VO100 - VO Series Case VS100 - VS Series Case http://www.flexible-borescope.com/gwsimages/VOCase-no-image.jpg 30.71 VOCase VOCase new 2009-12-31 VOCase tools VOScope http://www.flexible-borescope.com/product/voscope+-+video+grabber.html http://www.flexible-borescope.com/product/voscope+-+video+grabber.html VOscope - Video Grabber Video Intergration with the Following Units: VOscope - VS-Video Scope - Model VS36-10WW - Flexible Borescope - Link -- and -- VOscope - VS-Video Scope - Model VS72-10WW - Flexible Borescope - Link Product Literature - Download The Video Grabber works in many ways but only works with VS-Video Scope Models.  This is pretty much the universal unit,  allowing you to connect to a TV or VCR's RCA Jacks or you can take it Hi-Tech and use your computer.  All you need is a open USB 2.0 port on your computer and some software that comes with the unit.  Fantastic functionality for all applications. Video grabber works for you and not you for it.  Anyone could use this very simple product. Please Give us a call if you have any questions. Allows the VS36-10WW and VS72-10WW to be connected to any TV (RCA Direct Hook-Ups) May need to purchase a extention or adapter for TV/VCR hook-up. http://www.flexible-borescope.com/gwsimages/45003-45003.jpg 100.00 45003 45003 new 2009-12-31 45003 tools VOScope http://www.flexible-borescope.com/product/voscope+-+vo-halogen+scope+-+model+vo18-4h+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vo-halogen+scope+-+model+vo18-4h+-+flexible+borescope.html VOscope - VO-Halogen Scope - Model VO18-4H - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO Halogen Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: High resolution image bundle High flex shaft material Strong / stable light source Fuel and chemical resist materials Briefcase style instrument case Highly detailed imaging with 7400 pixels Superior optics provide easier viewing 4mm, 6mm diameters Water and abrasion resistant shaft material Industrial grade, 2 level light switch Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Replaceable halogen bulb in the handle Highly affordable Made in the USA http://www.flexible-borescope.com/gwsimages/VO18-4H-VO_Halogen.jpg 320.00 VO18-4H VO18-4H new 2009-12-31 VO18-4H tools VOScope http://www.flexible-borescope.com/product/voscope+-+vo-halogen+scope+-+model+vo18-6h+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vo-halogen+scope+-+model+vo18-6h+-+flexible+borescope.html VOscope - VO-Halogen Scope - Model VO18-6H - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO Halogen Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: High resolution image bundle High flex shaft material Strong / stable light source Fuel and chemical resist materials Briefcase style instrument case Highly detailed imaging with 7400 pixels Superior optics provide easier viewing 4mm, 6mm diameters Water and abrasion resistant shaft material Industrial grade, 2 level light switch Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Replaceable halogen bulb in the handle Highly affordable Made in the USA http://www.flexible-borescope.com/gwsimages/VO18-6H-VO_Halogen.jpg 320.00 VO18-6H VO18-6H new 2009-12-31 VO18-6H tools VOScope http://www.flexible-borescope.com/product/voscope+-+vo-halogen+scope+-+model+vo24-4h+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vo-halogen+scope+-+model+vo24-4h+-+flexible+borescope.html VOscope - VO-Halogen Scope - Model VO24-4H - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO Halogen Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: High resolution image bundle High flex shaft material Strong / stable light source Fuel and chemical resist materials Briefcase style instrument case Highly detailed imaging with 7400 pixels Superior optics provide easier viewing 4mm, 6mm diameters Water and abrasion resistant shaft material Industrial grade, 2 level light switch Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Replaceable halogen bulb in the handle Highly affordable Made in the USA http://www.flexible-borescope.com/gwsimages/VO24-4H-VO_Halogen.jpg 338.29 VO24-4H VO24-4H new 2009-12-31 VO24-4H tools VOScope http://www.flexible-borescope.com/product/voscope+-+vo-halogen+scope+-+model+vo24-6h+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vo-halogen+scope+-+model+vo24-6h+-+flexible+borescope.html VOscope - VO-Halogen Scope - Model VO24-6H - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO Halogen Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: High resolution image bundle High flex shaft material Strong / stable light source Fuel and chemical resist materials Briefcase style instrument case Highly detailed imaging with 7400 pixels Superior optics provide easier viewing 4mm, 6mm diameters Water and abrasion resistant shaft material Industrial grade, 2 level light switch Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Replaceable halogen bulb in the handle Highly affordable Made in the USA http://www.flexible-borescope.com/gwsimages/VO24-6H-VO_Halogen.jpg 338.29 VO24-6H VO24-6H new 2009-12-31 VO24-6H tools VOScope http://www.flexible-borescope.com/product/voscope+-+vo-halogen+scope+-+model+vo36-6h+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vo-halogen+scope+-+model+vo36-6h+-+flexible+borescope.html VOscope - VO-Halogen Scope - Model VO36-6H - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO Halogen Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: High resolution image bundle High flex shaft material Strong / stable light source Fuel and chemical resist materials Briefcase style instrument case Highly detailed imaging with 7400 pixels Superior optics provide easier viewing 4mm, 6mm diameters Water and abrasion resistant shaft material Industrial grade, 2 level light switch Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Replaceable halogen bulb in the handle Highly affordable Made in the USA http://www.flexible-borescope.com/gwsimages/VO36-6H-VO_Halogen.jpg 406.86 VO36-6H VO36-6H new 2009-12-31 VO36-6H tools VOScope http://www.flexible-borescope.com/product/voscope+-+vo-halogen+scope+-+model+vo48-6h+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vo-halogen+scope+-+model+vo48-6h+-+flexible+borescope.html VOscope - VO-Halogen Scope - Model VO48-6H - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO Halogen Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: High resolution image bundle High flex shaft material Strong / stable light source Fuel and chemical resist materials Briefcase style instrument case Highly detailed imaging with 7400 pixels Superior optics provide easier viewing 4mm, 6mm diameters Water and abrasion resistant shaft material Industrial grade, 2 level light switch Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Replaceable halogen bulb in the handle Highly affordable Made in the USA http://www.flexible-borescope.com/gwsimages/VO48-6H-VO_Halogen.jpg 537.14 VO48-6H VO48-6H new 2009-12-31 VO48-6H tools VOScope http://www.flexible-borescope.com/product/voscope+-+vo-led+scope+-+model+vo18-10ww+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vo-led+scope+-+model+vo18-10ww+-+flexible+borescope.html VOscope - VO-LED Scope - Model VO18-10WW - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO LED Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price Features High resolution image bundle High flex shaft material Strong / stable light source Fuel and chemical resist materials Briefcase style instrument case Highly detailed imaging with 7400 pixels High output LED lighting - 2 White LED's in tip No bulbs to change - Ever Superior optics provide easier viewing Spring Lok Design - Longer reach w/o drooping Waterproof shaft Petroleum & Chemical Resistant Industrial grade, 2 level light switch Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Replaceable halogen bulb in the handle Highly affordable   Product Includes: Model VO18-10WW (4) AA Alkaline Batteries Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VS18-10WW-VO_Halogen.jpg 320.00 VO18-10WW VO18-10WW new 2009-12-31 VO18-10WW tools VOScope http://www.flexible-borescope.com/product/voscope+-+vo-led+scope+-+model+vo24-10ww+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vo-led+scope+-+model+vo24-10ww+-+flexible+borescope.html VOscope - VO-LED Scope - Model VO24-10WW - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO LED Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price Features High resolution image bundle High flex shaft material Strong / stable light source Fuel and chemical resist materials Briefcase style instrument case Highly detailed imaging with 7400 pixels High output LED lighting - 2 White LED's in tip No bulbs to change - Ever Superior optics provide easier viewing Spring Lok Design - Longer reach w/o drooping Waterproof shaft Petroleum & Chemical Resistant Industrial grade, 2 level light switch Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Replaceable halogen bulb in the handle Highly affordable   Product Includes: Model VO24-10WW (4) AA Alkaline Batteries Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VO24-10WW-VO_Halogen.jpg 338.29 VO24-10WW VO24-10WW new 2009-12-31 VO24-10WW tools VOScope http://www.flexible-borescope.com/product/voscope+-+vo-led+scope+-+model+vo36-10ww+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vo-led+scope+-+model+vo36-10ww+-+flexible+borescope.html VOscope - VO-LED Scope - Model VO36-10WW - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO LED Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price Features High resolution image bundle High flex shaft material Strong / stable light source Fuel and chemical resist materials Briefcase style instrument case Highly detailed imaging with 7400 pixels High output LED lighting - 2 White LED's in tip No bulbs to change - Ever Superior optics provide easier viewing Spring Lok Design - Longer reach w/o drooping Waterproof shaft Petroleum & Chemical Resistant Industrial grade, 2 level light switch Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Replaceable halogen bulb in the handle Highly affordable   Product Includes: Model VO36-10WW (4) AA Alkaline Batteries Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VO36-10WW-VO_Halogen.jpg 406.86 VO36-10WW VO36-10WW new 2009-12-31 VO36-10WW tools VOScope http://www.flexible-borescope.com/product/voscope+-+vo-led+scope+-+model+vo48-10ww+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vo-led+scope+-+model+vo48-10ww+-+flexible+borescope.html VOscope - VO-LED Scope - Model VO48-10WW - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO LED Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price Features High resolution image bundle High flex shaft material Strong / stable light source Fuel and chemical resist materials Briefcase style instrument case Highly detailed imaging with 7400 pixels High output LED lighting - 2 White LED's in tip No bulbs to change - Ever Superior optics provide easier viewing Spring Lok Design - Longer reach w/o drooping Waterproof shaft Petroleum & Chemical Resistant Industrial grade, 2 level light switch Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Replaceable halogen bulb in the handle Highly affordable   Product Includes: Model VO48-10WW (4) AA Alkaline Batteries Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VO48-10WW-VO_Halogen.jpg 537.14 VO48-10WW VO48-10WW new 2009-12-31 VO48-10WW tools VOScope http://www.flexible-borescope.com/product/voscope+-+vs-video+scope+-+model+vs36-10ww+-+flexible+borescope+-+video+stik+-.html http://www.flexible-borescope.com/product/voscope+-+vs-video+scope+-+model+vs36-10ww+-+flexible+borescope+-+video+stik+-.html Instock! - Ships out the same day before 5:00PM EST VOscope - VS-Video Scope - Model VS36-10WW - Flexible Borescope NEW! Visual Optics new video based inspection scope, the VS36-10WW, gives you the latest in remote video technology. The Video Stik is for remote inspection of areas generally inaccessible to the naked eye. IT comes with a distal video camera at the end of a 36" shaft for internal inspection of engines, A/C systems, interior structures of walls, and other industrial and simi liar applications. Imaging and illumination is provided by a full color image sensor and dual solid state LEDs which are controlled by an on/off rocker switch. The 2.5" full color LCD screen allows the user to observe live video from the distal camera. The unit is powered by 4-AA batteries. The Video Stik is shipped with a protective case for storage. Accessory Mirror allows user to see 90 degrees to axis of the shaft. The Magnet accessory will pick up approx 1/4 lb. Features High resolution remote color camera 2.5" full color viewing monitor 10mm shaft diameter Waterproof, Flexible shaft 36" standard shaft length High output LED illumination 5 hrs operation on 4-AA batteries (included) Mirror and Magnet accessories included Video Output for recording Poly pro storage case Product Includes: Model VS36-10WW (4) AA Alkaline Batteries Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty Recommended Accessory VOscope - Video Grabber (Only works with VS36-10WW and VS72-10WW) Specifications Shaft Length: 36" Water Resistant Distal Tip Dia: 0.42" Maximum W/ Accessories: 0.46 Maximum Viewing Angle: 55 Degrees Viewing Distance: 0.4" to Infinity Resolution: 320x240 pixels Viewing Monitor: Color 2.5" LCD Video outport: RCA - NTSC signal Shaft Radius: 2.5" Minimum Power: Alkaline AA batteries (4) Battery Life: 4hours Storage Temp: -4F to 158F (-20 to +70) Operating Temp: 32F to 113F(0 to 45) Accessories: Mirror and Magnet Warranty: 1 Year A must have tool for the everyday mechanic or professional working in: Automotive Marine Law Enforcement HVAC Home Inspection And so much more PDF Brouchures: VOscope VS36-10WW and VS72-10WW - User Manual - Download VOscope VS36-10WW and VS72-10WW - Advertisement - Download Designed, Engineered, and Manufactured in the USA http://www.flexible-borescope.com/gwsimages/VS36-10WW-VS36PIC1.jpg 250.00 VS36-10WW VS36-10WW new 2009-12-31 VS36-10WW tools VOScope http://www.flexible-borescope.com/product/voscope+-+vs-video+scope+-+model+vs72-10ww+-+flexible+borescope+-+video+stik+-.html http://www.flexible-borescope.com/product/voscope+-+vs-video+scope+-+model+vs72-10ww+-+flexible+borescope+-+video+stik+-.html  Instock! - Ships out the same day before 5:00PM EST VOscope - VS-Video Scope - Model VS72-10WW - Flexible Borescope NEW! Visual Optics new video based inspection scope, the VS72-10WW, gives you the latest in remote video technology. The Video Stik is for remote inspection of areas generally inaccessible to the naked eye. IT comes with a distal video camera at the end of a 72" shaft for internal inspection of engines, A/C systems, interior structures of walls, and other industrial and simi liar applications. Imaging and illumination is provided by a full color image sensor and dual solid state LEDs which are controlled by an on/off rocker switch. The 2.5" full color LCD screen allows the user to observe live video from the distal camera. The unit is powered by 4-AA batteries. The Video Stik is shipped with a protective case for storage. Accessory Mirror allows user to see 90 degrees to axis of the shaft. The Magnet accessory will pick up approx 1/4 lb. Features High resolution remote color camera 2.5" full color viewing monitor 10mm shaft diameter Waterproof, Flexible shaft 72" standard shaft length High output LED illumination 5 hrs operation on 4-AA batteries (included) Mirror and Magnet accessories included Video Output for recording Poly pro storage case Product Includes: Model VS72-10WW (4) AA Alkaline Batteries Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty Recommended Accessory VOscope - Video Grabber (Only works with VS36-10WW and VS72-10WW) Specifications Shaft Length: 72" Water Resistant Distal Tip Dia: 0.42" Maximum W/ Accessories: 0.46 Maximum Viewing Angle: 55 Degrees Viewing Distance: 0.4" to Infinity Resolution: 320x240 pixels Viewing Monitor: Color 2.5" LCD Video outport: RCA - NTSC signal Shaft Radius: 2.5" Minimum Power: Alkaline AA batteries (4) Battery Life: 4hours Storage Temp: -4F to 158F (-20 to +70) Operating Temp: 32F to 113F (0 to 45) Accessories: Mirror and Magnet Warranty: 1 Year A must have tool for the everyday mechanic or professional working in: Automotive Marine Law Enforcement HVAC Home Inspection And so much more PDF Brouchures: VOscope VS36-10WW and VS72-10WW - User Manual - Download VOscope VS36-10WW and VS72-10WW - Advertisement - Download Designed, Engineered, and Manufactured in the USA http://www.flexible-borescope.com/gwsimages/VS72-10WW-VS36PIC1.jpg 300.00 VS72-10WW VS72-10WW new 2009-12-31 VS72-10WW tools VOScope http://www.flexible-borescope.com/product/voscope+-+vt-scope+-+model+vt18-4fled+-+wtih+led+flash+light+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vt-scope+-+model+vt18-4fled+-+wtih+led+flash+light+-+flexible+borescope.html VOscope - VT-Scope - Model VT18-4FLED - Wtih LED Flash Light - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO FLED Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: Comes with White LED Flashlight High Output Detachable Xeno Flashlight Strong White LED Light Source Flexible Nylon Shaft (Patent Pending) Highly detailed imaging with 7400 pixels Compact Design Superior optics provide easier viewing Waterproof shaft Petroleum & Chemical Resistant Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Highly affordable   Product Includes: Model VT18-4FLED White LED Flash Light Batteries Included Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VT18-4FLED-vt-fled.jpg 365.71 VT18-4FLED VT18-4FLED new 2009-12-31 VT18-4FLED tools VOScope http://www.flexible-borescope.com/product/voscope+-+vt-scope+-+model+vt18-6fled+-+wtih+led+flash+light+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vt-scope+-+model+vt18-6fled+-+wtih+led+flash+light+-+flexible+borescope.html VOscope - VT-Scope - Model VT18-6FLED - Wtih LED Flash Light - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO FLED Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: Comes with White LED Flashlight High Output Detachable Xeno Flashlight Strong White LED Light Source Flexible Nylon Shaft (Patent Pending) Highly detailed imaging with 7400 pixels Compact Design Superior optics provide easier viewing Waterproof shaft Petroleum & Chemical Resistant Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Highly affordable Product Includes: Model VT18-4FLED White LED Flash Light Batteries Included Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VT18-6FLED-vt-fled.jpg 365.71 VT18-6FLED VT18-6FLED new 2009-12-31 VT18-6FLED tools VOScope http://www.flexible-borescope.com/product/voscope+-+vt-scope+-+model+vt24-4fled+-+wtih+led+flash+light+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vt-scope+-+model+vt24-4fled+-+wtih+led+flash+light+-+flexible+borescope.html VOscope - VT-Scope - Model VT24-4FLED - Wtih LED Flash Light - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO FLED Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: Comes with White LED Flashlight High Output Detachable Xeno Flashlight Strong White LED Light Source Flexible Nylon Shaft (Patent Pending) Highly detailed imaging with 7400 pixels Compact Design Superior optics provide easier viewing Waterproof shaft Petroleum & Chemical Resistant Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Highly affordable   Product Includes: Model VT24-4FLED White LED Flash Light Batteries Included Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VT24-4FLED-vt-fled.jpg 393.14 VT24-4FLED VT24-4FLED new 2009-12-31 VT24-4FLED tools VOScope http://www.flexible-borescope.com/product/voscope+-+vt-scope+-+model+vt24-6fled+-+wtih+led+flash+light+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vt-scope+-+model+vt24-6fled+-+wtih+led+flash+light+-+flexible+borescope.html VOscope - VT-Scope - Model VT24-6FLED - Wtih LED Flash Light - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO FLED Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: Comes with White LED Flashlight High Output Detachable Xeno Flashlight Strong White LED Light Source Flexible Nylon Shaft (Patent Pending) Highly detailed imaging with 7400 pixels Compact Design Superior optics provide easier viewing Waterproof shaft Petroleum & Chemical Resistant Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Highly affordable   Product Includes: Model VT24-6FLED White LED Flash Light Batteries Included Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VT24-6FLED-vt-fled.jpg 393.14 VT24-6FLED VT24-6FLED new 2009-12-31 VT24-6FLED tools VOScope http://www.flexible-borescope.com/product/voscope+-+vt-scope+-+model+vt36-6fled+-+wtih+led+flash+light+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vt-scope+-+model+vt36-6fled+-+wtih+led+flash+light+-+flexible+borescope.html VOscope - VT-Scope - Model VT36-6FLED - Wtih LED Flash Light - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO FLED Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: Comes with White LED Flashlight High Output Detachable Xeno Flashlight Strong White LED Light Source Flexible Nylon Shaft (Patent Pending) Highly detailed imaging with 7400 pixels Compact Design Superior optics provide easier viewing Waterproof shaft Petroleum & Chemical Resistant Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Highly affordable   Product Includes: Model VT36-6FLED White LED Flash Light Batteries Included Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VT36-6FLED-vt-fled.jpg 461.71 VT36-6FLED VT36-6FLED new 2009-12-31 VT36-6FLED tools VOScope http://www.flexible-borescope.com/product/voscope+-+vt-scope+-+model+vt48-6fled+-+wtih+led+flash+light+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vt-scope+-+model+vt48-6fled+-+wtih+led+flash+light+-+flexible+borescope.html VOscope - VT-Scope - Model VT48-6FLED - Wtih LED Flash Light - Flexible Borescope Visual Optics has engineered and manufactured the next step in the evolution of the fiber optic bore scope. Their creation of the VO FLED Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. The VO Series Fiber Scope achieves industrial level quality at an affordable price. Features: Comes with White LED Flashlight High Output Detachable Xeno Flashlight Strong White LED Light Source Flexible Nylon Shaft (Patent Pending) Highly detailed imaging with 7400 pixels Compact Design Superior optics provide easier viewing Waterproof shaft Petroleum & Chemical Resistant Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Highly affordable   Product Includes: Model VT48-6FLED White LED Flash Light Batteries Included Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VT48-6FLED-vt-fled.jpg 587.43 VT48-6FLED VT48-6FLED new 2009-12-31 VT48-6FLED tools VOScope http://www.flexible-borescope.com/product/voscope+-+vt-scope+uv+-+model+vt18-4fluv+-+wtih+led+flashlight+-+white+and+uv+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vt-scope+uv+-+model+vt18-4fluv+-+wtih+led+flashlight+-+white+and+uv+-+flexible+borescope.html VOscope - VT-Scope UV - Model VT18-4FLUV - Wtih LED Flashlight - White and UV - Flexible Borescope All VT Series Scopes (4.3MM or 6MM) can now be purchased with LEAK DETENTION CAPABILITIES. Exchanging the White Light LED flashlight with a UV Flashlight does this.The UV Flashlight will Fluoresce Leak detection dyes. The Kits (referred to as - FLUV) come complete with both flashlights. The VO FLUV Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. Features: Comes with BOTH the White & UV LED Flashlights  Flexible Nylon Shaft (Paten Pending) Highly detailed imaging with 7400 pixels Compact Design Superior optics provide easier viewing Waterproof shaft Petroleum & Chemical Resistant Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Highly affordable Product Includes: Model Model VT18-4FLUV White LED Flash Light Blue LED Flash Light Batteries Included Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VT18-4FLUV-vt-fled.jpg 411.43 VT18-4FLUV VT18-4FLUV new 2009-12-31 VT18-4FLUV tools VOScope http://www.flexible-borescope.com/product/voscope+-+vt-scope+uv+-+model+vt18-6fluv+-+wtih+led+flashlight+-+white+and+uv+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vt-scope+uv+-+model+vt18-6fluv+-+wtih+led+flashlight+-+white+and+uv+-+flexible+borescope.html VOscope - VT-Scope UV - Model VT18-6FLUV - Wtih LED Flashlight - White and UV - Flexible Borescope All VT Series Scopes (4.3MM or 6MM) can now be purchased with LEAK DETENTION CAPABILITIES. Exchanging the White Light LED flashlight with a UV Flashlight does this.The UV Flashlight will Fluoresce Leak detection dyes. The Kits (referred to as - FLUV) come complete with both flashlights. The VO FLUV Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. Features: Comes with BOTH the White & UV LED Flashlights  Flexible Nylon Shaft (Paten Pending) Highly detailed imaging with 7400 pixels Compact Design Superior optics provide easier viewing Waterproof shaft Petroleum & Chemical Resistant Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Highly affordable Product Includes: Model Model VT18-6FLUV White LED Flash Light Blue LED Flash Light Batteries Included Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VT18-6FLUV-vt-fled.jpg 411.43 VT18-6FLUV VT18-6FLUV new 2009-12-31 VT18-6FLUV tools VOScope http://www.flexible-borescope.com/product/voscope+-+vt-scope+uv+-+model+vt24-4fluv+-+wtih+led+flashlight+-+white+and+uv+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vt-scope+uv+-+model+vt24-4fluv+-+wtih+led+flashlight+-+white+and+uv+-+flexible+borescope.html VOscope - VT-Scope UV - Model VT24-4FLUV - Wtih LED Flashlight - White and UV - Flexible Borescope All VT Series Scopes (4.3MM or 6MM) can now be purchased with LEAK DETENTION CAPABILITIES. Exchanging the White Light LED flashlight with a UV Flashlight does this.The UV Flashlight will Fluoresce Leak detection dyes. The Kits (referred to as - FLUV) come complete with both flashlights. The VO FLUV Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. Features: Comes with BOTH the White & UV LED Flashlights  Flexible Nylon Shaft (Paten Pending) Highly detailed imaging with 7400 pixels Compact Design Superior optics provide easier viewing Waterproof shaft Petroleum & Chemical Resistant Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Highly affordable Product Includes: Model Model VT24-4FLUV White LED Flash Light Blue LED Flash Light Batteries Included Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VT24-4FLUV-vt-fled.jpg 434.29 VT24-4FLUV VT24-4FLUV new 2009-12-31 VT24-4FLUV tools VOScope http://www.flexible-borescope.com/product/voscope+-+vt-scope+uv+-+model+vt24-6fluv+-+wtih+led+flashlight+-+white+and+uv+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vt-scope+uv+-+model+vt24-6fluv+-+wtih+led+flashlight+-+white+and+uv+-+flexible+borescope.html VOscope - VT-Scope UV - Model VT24-6FLUV - Wtih LED Flashlight - White and UV - Flexible Borescope All VT Series Scopes (4.3MM or 6MM) can now be purchased with LEAK DETENTION CAPABILITIES. Exchanging the White Light LED flashlight with a UV Flashlight does this.The UV Flashlight will Fluoresce Leak detection dyes. The Kits (referred to as - FLUV) come complete with both flashlights. The VO FLUV Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. Features: Comes with BOTH the White & UV LED Flashlights  Flexible Nylon Shaft (Paten Pending) Highly detailed imaging with 7400 pixels Compact Design Superior optics provide easier viewing Waterproof shaft Petroleum & Chemical Resistant Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Highly affordable Product Includes: Model Model VT24-6FLUV White LED Flash Light Blue LED Flash Light Batteries Included Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/Model VT24-6FLUV-vt-fled.jpg 434.80 VT24-6FLUV VT24-6FLUV new 2009-12-31 VT24-6FLUV tools VOScope http://www.flexible-borescope.com/product/voscope+-+vt-scope+uv+-+model+vt36-6fluv+-+wtih+led+flashlight+-+white+and+uv+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vt-scope+uv+-+model+vt36-6fluv+-+wtih+led+flashlight+-+white+and+uv+-+flexible+borescope.html VOscope - VT-Scope UV - Model VT36-6FLUV - Wtih LED Flashlight - White and UV - Flexible Borescope All VT Series Scopes (4.3MM or 6MM) can now be purchased with LEAK DETENTION CAPABILITIES. Exchanging the White Light LED flashlight with a UV Flashlight does this.The UV Flashlight will Fluoresce Leak detection dyes. The Kits (referred to as - FLUV) come complete with both flashlights. The VO FLUV Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. Features: Comes with BOTH the White & UV LED Flashlights  Flexible Nylon Shaft (Paten Pending) Highly detailed imaging with 7400 pixels Compact Design Superior optics provide easier viewing Waterproof shaft Petroleum & Chemical Resistant Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Highly affordable Product Includes: Model Model VT36-6FLUV White LED Flash Light Blue LED Flash Light Batteries Included Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty http://www.flexible-borescope.com/gwsimages/VT36-6FLUV-vt-fled.jpg 502.86 VT36-6FLUV VT36-6FLUV new 2009-12-31 VT36-6FLUV tools VOScope http://www.flexible-borescope.com/product/voscope+-+vt-scope+uv+-+model+vt48-6fluv+-+wtih+led+flashlight+-+white+and+uv+-+flexible+borescope.html http://www.flexible-borescope.com/product/voscope+-+vt-scope+uv+-+model+vt48-6fluv+-+wtih+led+flashlight+-+white+and+uv+-+flexible+borescope.html VOscope - VT-Scope UV - Model VT48-6FLUV - Wtih LED Flashlight - White and UV - Flexible Borescope All VT Series Scopes (4.3MM or 6MM) can now be purchased with LEAK DETENTION CAPABILITIES. Exchanging the White Light LED flashlight with a UV Flashlight does this.The UV Flashlight will Fluoresce Leak detection dyes. The Kits (referred to as - FLUV) come complete with both flashlights. The VO FLUV Series Fiber Scope has raised the bar in the areas of optical quality, image light output, shaft control and material tolerance. Features: Comes with BOTH the White & UV LED Flashlights  Flexible Nylon Shaft (Paten Pending) Highly detailed imaging with 7400 pixels Compact Design Superior optics provide easier viewing Waterproof shaft Petroleum & Chemical Resistant Viewing range, 40 degree - 1/2 inch to infinity Standard lengths 18, 24, 36 and 48 inch Highly affordable Product Includes: Model Model VT48-6FLUV White LED Flash Light Blue LED Flash Light Batteries Included Carrying Case (Hard Shell Padded) Mirror Attachment (MIR-10) Magnet Attachment (MAG-10) 3 Year Warranty   http://www.flexible-borescope.com/gwsimages/VT48-6FLUV-vt-fled.jpg 635.43 VT48-6FLUV VT48-6FLUV new 2009-12-31 VT48-6FLUV tools VOScope